Solenoid Valves (Shift Solenoid Valves, And Timing Solenoid Valve) Inspection - Suzuki Swift Sport 2004 Service & Repair Manual

Installation
1) Install shift solenoid valve-A (No.1) (1), shift solenoid
valve-B (No.2) (2) and timing solenoid valve (3).
Tightening torque
Shift solenoid bolt (a): 11 N·m (1.1 kgf-m, 8.0 lb-
ft)
(a)
3
2) Connect solenoid connectors identifying their
installing positions by wire color.
Solenoid coupler
Shift solenoid valve-A (No.1) (2)
Shift solenoid valve-B (No.2) (3)
Timing solenoid valve (1)
TCC pressure control solenoid
valve (4)
Pressure control solenoid valve (5)
3) Install transmission fluid sensor (6) and sensor wire
to clamp.
4
6
2
1
I4RS0A510029-01
Wire color
White
Black
Yellow
Light green / Brown
Green / Gray
5
3
2
1
I4RS0A510030-01
Automatic Transmission/Transaxle:
4) Install oil strainer assembly (1).
Tightening torque
Oil strainer bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
5) Install new oil pan gasket (1) and oil pan (2).
6) Tighten oil pan bolts to specified torque diagonally
and little by little.
Tightening torque
Oil pan bolt (b): 7.0 N·m (0.7 kgf-m, 5.0 lb-ft)
Solenoid Valves (Shift Solenoid Valves, and
Timing Solenoid Valve) Inspection
Resistance Check
Check shift solenoid valves and timing solenoid valve.
Shift solenoid valves and timing solenoid valve
resistance
Standard: 11 – 15 Ω at 20 °C (68 °F)
5A-99
I2RH0B510059-01
I2RH0B510060-01
S7RS0B5106023
I2RH0B510061-01