Maintaining Ethernet Oam - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 3 Run:
oam-bind ingress cfm md md-name ma ma-name vrrp vrid vrid interface interface-type
interface-number
Association between CFM and VRRP is configured.
----End

8.2.14 Maintaining Ethernet OAM

This section describes how to maintain Ethernet OAM. Detailed operations include deleting
CCM statistics, monitoring Ethernet OAM.
Clearing the Statistics on Error CCMs
You are recommended to delete CCM statistics before collecting CCM statistics within a
specified period.
Context
Statistics on Error CCMs cannot be restored after you clear it. So, confirm the action before you
use the command.
Procedure
Step 1 Run the reset cfm error-packet receive statistics [ md md-name [ ma ma-name [ remote-
mep mep-id mep-id ] ] ] command in the user view to clear statistics of error CCMs.
----End
Monitoring the Running Status of Ethernet OAM
By monitoring the operating status of Ethernet OAM, you can view information about Ethernet
OAM.
Context
In routine maintenance, you can select to run the following commands in any view To check the
running status of Ethernet OAM.
Procedure
l
l
Issue 02 (2014-09-30)
NOTICE
Run the display oam global configuration command in any view to check the global
configurations of Ethernet OAM on the device.
Run the display cfm error-packet statistics [ md md-name [ ma ma-name [ remote-mep
mep-id mep-id ] ] ] command in any view to check statistics of error CCMs received on
the device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
529