Huawei NetEngine80E Configuration Manual - Reliability page 503

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
VSI Name
L2VC ID
MEP Number
RMEP Number
Suppressing Alarms : No
Sending Ais Packet : No
Interface TLV
RDI Track-action
MD Name
MD Name Format
Level
MIP Create-type
SenderID TLV-type
MA Name
MA Name Format
Interval
Priority
VLAN ID
VSI Name
L2VC ID
MEP Number
RMEP Number
Suppressing Alarms : No
Sending Ais Packet : No
Interface TLV
RDI Track-action
Run the display cfm mep command. If information about the MEP is displayed, it means that
the configuration is successful.
<HUAWEI> display cfm mep
The total number of MEPs is 2
MD Name
MD Name Format
Level
MD Name Format
MEP ID
VLAN ID
VSI Name
Interface Name
CCM Send
Direction
MD Name
MD Name Format
Level
MA Name
MA Name Format
MEP ID
VLAN ID
VSI Name
Interface Name
CCM Send
Direction
Run the display cfm remote-mep command. If information about the RMEP is displayed, it
means that the configuration is successful.
<HUAWEI> display cfm remote-mep
The total number of RMEPs is 3
The status of RMEPs : 0 up, 3 down, 0 disable
--------------------------------------------------
MD Name
Level
MA Name
RMEP ID
VLAN ID
VSI Name
Issue 02 (2014-09-30)
: --
: --
: 2
: 3
: disabled
: --
: md1
: string
: 7
: none
: Defer
: ma2
: string
: 10ms
: 5
: 7
: --
: --
:1
: 4
: disabled
: --
: md2
: string
: 7
: string
: 40
: 10
: --
: GigabitEthernet1/0/1
: enabled
: outward
: md3
: string
: 3
: ma1
: string
: 100
: 20
: --
: GigabitEthernet2/0/1
: enabled
: outward
: md1
: 4
: ma1
: 50
: 10
: --
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
486