Setting The Priority Of A Bfd Session - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
The system view is displayed.
Step 2 Run:
bfd bfd-name
The BFD session view is displayed.
Step 3 Run:
description description
The description of a BFD session is added.
description is a string of 1 to 51 characters.
The default description of a BFD session is Null.
You can run the undo description command to delete the description of a BFD session.
----End

5.11.5 Setting the Priority of a BFD Session

A priority can be set for a BFD session. Packets of a BFD session with high priority can be
preferentially transmitted.
Procedure
l
l
Issue 02 (2014-09-30)
NOTE
To modify a parameter after a BFD session has been created, run a corresponding command (such as
process-pst, process-interface-status,min-tx-interval, min-rx-interval, detect-multiplier, tos-exp
(BFD session view), wtr, or description). The modification takes effect immediately without the
commit command configured.
Setting the Priority for a static BFD Session
1. Run:
system-view
The system view is displayed.
2. Run:
bfd bfd-name
The BFD session view is displayed.
3. Run:
tos-exp tos-value
The priority of the static BFD session is set.
tos-value is an integer ranging from 0 to 7.
The default priority is 7.
Setting the Priority for all the static BFD Sessions
1. Run:
system-view
The system view is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
355