Huawei NetEngine80E Configuration Manual - Reliability page 388

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[RouterB-Pos1/0/0] ip-trunk 1
[RouterB-Pos1/0/0] quit
[RouterB] interface pos 2/0/0
[RouterB-Pos2/0/0] undo shutdown
[RouterB-Pos2/0/0] link-protocol hdlc
[RouterB-Pos2/0/0] ip-trunk 1
[RouterB-Pos2/0/0] quit
After the configurations, run the display interface ip-trunk command on Router A or Router
B. You can view that the status of the IP-Trunk link is Up.
Use the display on Router A as an example.
[RouterA] display interface ip-trunk 1
Ip-Trunk1 current state : UP
Line protocol current state : UP
Last line protocol up time: 2007-11-12, 10:18:09
Description : Ip-Trunk1 Interface, Route Port
Route Port,Hash arithmetic : According to flow,Maximal BW: 5G, Current BW: 5G, T,he
Maximum Transmit Unit is 4470
Internet Address is 10.1.1.1/24 Link layer protocol is nonstandard HDLC
Physical is IP_TRUNK
-----------------------------------------------------
PortName
-----------------------------------------------------
Pos1/0/0
Pos2/0/0
-----------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 2
The IP-Trunk interfaces of Router A and Router B can ping through each other.
[RouterA] ping -a 10.1.1.1 10.1.1.2
PING 10.1.1.2: 56
--- 10.1.1.2 ping statistics ---
Step 2 Configure single-hop BFD for the IP-Trunk member link.
# Configure a BFD session on Router A and bind the member interface POS 1/0/0 to the BFD
session.
[RouterA] bfd
[RouterA-bfd] quit
[RouterA] bfd to_Link1 bind peer-ip default-ip interface pos 1/0/0
[RouterA-bfd-session-to_Link1] discriminator local 10
[RouterA-bfd-session-to_Link1] discriminator remote 20
Issue 02 (2014-09-30)
Last 300 seconds input rate 192 bits/sec, 0 packets/sec
Last 300 seconds output rate 24 bits/sec, 0 packets/sec
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 69 packets,13465 bytes,
0 errors,71 drops,
Output:45 packets,1170 bytes,
0 errors,0 drops
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Status
UP
UP
data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=255 time=310 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=30 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=40 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/94/310 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0.01%
Weight
1
1
5 BFD Configuration
371