Huawei NetEngine80E Configuration Manual - Reliability page 201

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Device
Router A
Router B
Router C
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure interface IP addresses and OSPF on Router A, Router B, and Router C.
# Configure Router A.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] interface gigabitethernet 1/0/1
[RouterA-GigabitEthernet1/0/1] undo shutdown
[RouterA-GigabitEthernet1/0/1] ip address 10.10.1.1 24
[RouterA-GigabitEthernet1/0/1] quit
Issue 02 (2014-09-30)
Configure interface IP addresses and OSPF on Router A, Router B, and Router C, and
configure Layer 2 transparent transmission on switches.
Create two VRRP backup groups on Router A and Router B, respectively. Then configure
different priorities for the routers in the two VRRP backup groups to determine the master
or backup role.
Interface IP addresses
VRRP backup group ID for host A: 10; virtual IP address: 10.10.1.111
Router A's priority in VRRP backup group 10: 120; Router B's priority in VRRP backup
group 10: 100
VRRP backup group ID for host B: 20; virtual IP address: 10.20.1.111
Router B's priority in VRRP backup group 20: 120; Router A's priority in VRRP backup
group 20: 100
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Interface
GE 1/0/1
GE 1/0/2
GE 1/0/3
GE 1/0/1
GE 1/0/2
GE 1/0/3
GE 1/0/1
GE 1/0/2
GE 1/0/3
4 VRRP Configuration
IP Address
10.10.1.1/24
10.20.1.1/24
192.168.1.1/24
10.10.1.2/24
10.20.1.2/24
192.168.2.1/24
192.168.2.2/24
192.168.1.2/24
192.168.3.2/24
184