Huawei NetEngine80E Configuration Manual - Reliability page 407

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
-----------------------------------------------------
PortName
-----------------------------------------------------
GigabitEthernet1/0/0
GigabitEthernet2/0/0
-----------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 1
Run the shutdown command on GE 2/0/0 of Router A.
Run the display bfd session all verbose command and the display interface eth-trunk
command on Router A and Router B. You can view that both the BFD session and Eth-Trunk
interface become Down.
[RouterA] display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 256
--------------------------------------------------------------------------------
Local Discriminator
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer Ip Address
NextHop Ip Address
Bind Interface
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms): 10
Local Detect Multi
Echo Passive
Destination Port
Proc interface status
WTR Interval (ms)
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
[RouterA] display interface eth-trunk 1
Eth-Trunk1 current state : Down
Line protocol current state : Down
Last line protocol up time: 2007-11-09, 10:45:18
Description: Eth-Trunk1 Interface
Route Port,Hash arithmetic : According to flow,Maximal BW: 4G, Current BW: 4G, The
Maximum Transmit Unit is 1500
Internet Address is 10.1.1.1/24
IP Sending Frames" Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc90-5851
Physical is ETH_TRUNK
Issue 02 (2014-09-30)
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Output:0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Status
DOWN
UP
Total UP/DOWN Session Number : 1/0
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0.00%
Weight
(One Hop) State : Down
: 10
Remote Discriminator
: Asynchronous Mode Without Echo Function
: Interface(Eth-Trunk1)
: Static
: 10.1.1.2
: 10.1.1.2
: Eth-Trunk1
: 1
TOS-EXP
: 10
Min Rx Interval (ms)
Actual Rx Interval (ms): 10
: 3
Detect Interval (ms)
: Disable
Acl Number
: 3784
TTL
: Disable
Process PST
: 300000
: 3
: Control Detection Time Expired
: No Application Bind
: --
Session Detect TmrID
: --
Session WTR TmrID
: FSM-0|RCV-0|IF-0|TOKEN-0
: --
5 BFD Configuration
1
1
Name : atob
: 10
: 30
: --
: 255
: Disable
: 20
: 7
: --
: --
390

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents