Huawei NetEngine80E Configuration Manual - Reliability page 628

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Assign IP addresses to interfaces on PE1, PE2, PE3, and CE1.
# Configure PE1. Create VLAN 10, and add GE 2/0/0 and GE 3/0/0 into VLAN 10.
<PE1> system-view
[PE1] interface gigabitethernet 2/0/0
[PE1-GigabitEthernet2/0/0] portswitch
[PE1-GigabitEthernet2/0/0] quit
[PE1] interface gigabitethernet 3/0/0
[PE1-GigabitEthernet3/0/0] portswitch
[PE1-GigabitEthernet3/0/0] quit
[PE1] vlan 10
[PE1-vlan10] port gigabitethernet 2/0/0
[PE1-vlan10] port gigabitethernet 3/0/0
[PE1-vlan10] interface vlanif10
[PE1-vlanif10] ip address 10.1.1.2 255.255.255.0
[PE1-vlanif10] quit
# Configure PE2. Create VLAN 10, and add GE 2/0/0 and GE 3/0/0 into VLAN 10.
<PE2> system-view
[PE2] interface gigabitethernet 2/0/0
[PE2-GigabitEthernet2/0/0] portswitch
[PE2-GigabitEthernet2/0/0] quit
[PE2] interface gigabitethernet 3/0/0
[PE2-GigabitEthernet3/0/0] portswitch
[PE2-GigabitEthernet3/0/0] quit
[PE2] vlan 10
[PE2-vlan10] port gigabitethernet 2/0/0
[PE2-vlan10] port gigabitethernet 3/0/0
[PE2-vlan10] interface vlanif10
[PE2-vlanif10] ip address 10.1.1.3 255.255.255.0
[PE2-vlanif10] quit
# Configure CE1. Create VLAN 10, and add GE 1/0/0 and GE 2/0/0 into VLAN 10.
<CE1> system-view
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] portswitch
[CE1-GigabitEthernet1/0/0] quit
[CE1] interface gigabitethernet 2/0/0
[CE1-GigabitEthernet2/0/0] portswitch
[CE1-GigabitEthernet2/0/0] quit
[CE1-vlan10] port gigabitethernet 1/0/0
[CE1-vlan10] port gigabitethernet 2/0/0
[CE1-vlan10] interface vlanif10
[CE1-vlanif10] ip address 10.1.1.1 255.255.255.0
Issue 02 (2014-09-30)
Create the VRRP backup group and enable EFM OAM extension to track the interface
status.
IP address of each interface, including the physical interface and VLANIF interface
MPLS LSR IDs of PEs
Names of the VPN instances, router distinguishers (RDs), and VPN targets on PEs
Virtual IP address of the VRRP backup group and VRRP priorities of master and backup
routers
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
611

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents