Huawei NetEngine80E Configuration Manual - Reliability page 884

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
2.
3.
4.
Issue 02 (2014-09-30)
Main PW Token
0x800003
Slave PW Token
0x0
Tnl Type
LSP
OutInterface
GigabitEthernet1/0/2
Backup
OutInterface :
Stp Enable
0
PW Last Up Time
14:19:55
PW Total Up Time
Configure basic Ethernet CFM functions and specify the MEP type as inward.
Configure basic Ethernet CFM functions on each PE. Specify the Ethernet CFM protocol
in the version of IEEE Standard 802.1ag-2007. Create an MD named md1 and an MA
named ma1, and bind the MA to the VSI.
# Configure PE1.
<HUAWEI> system-view
[HUAWEI] sysname PE1
[PE1] cfm enable
[PE1] cfm version standard
[PE1] cfm md md1
[PE1-md-md1] ma ma1
[PE1-md-md1-ma-ma1] map vsi ldp1
[PE1-md-md1-ma-ma1] mep mep-id 1 interface gigabitethernet1/0/1.1 inward
[PE1-md-md1-ma-ma1] mep ccm-send mep-id 1 enable
[PE1-md-md1-ma-ma1] remote-mep mep-id 2
[PE1-md-md1-ma-ma1] remote-mep ccm-receive mep-id 2 enable
[PE1-md-md1-ma-ma1] quit
[PE1-md-md1] quit
# Configure PE2.
<HUAWEI> system-view
[HUAWEI] sysname PE2
[PE2] cfm enable
[PE2] cfm version standard
[PE2] cfm md md1
[PE2-md-md1] ma ma1
[PE2-md-md1-ma-ma1] map vsi ldp1
[PE2-md-md1-ma-ma1] mep mep-id 2 interface gigabitethernet1/0/1.1 inward
[PE2-md-md1-ma-ma1] mep ccm-send mep-id 2 enable
[PE2-md-md1-ma-ma1] remote-mep mep-id 1
[PE2-md-md1-ma-ma1] remote-mep ccm-receive mep-id 1 enable
[PE2-md-md1-ma-ma1] quit
[PE2-md-md1] quit
Configure the DMM reception function on PE2.
# Configure PE2.
[PE2-md-md1-ma-ma1] delay-measure two-way receive mep 2 peer-ip 1.1.1.1
[PE1-md-md1-ma-ma1] quit
[PE1-md-md1] quit
Enable on-demand two-way frame delay measurement for the PW on the VPLS network.
# Configure PE1.
[PE1-md-md1-ma-ma1] delay-measure two-way send mep 1 remote-mep 2 interval
1000 count 20 peer-ip 2.2.2.2
[PE1-md-md1-ma-ma1] quit
[PE1-md-md1] quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:
:
:
:
:
: 2010/10/12
: 0 days, 1 hours, 1 minutes, 28 seconds
8 Ethernet OAM Configuration
867