Huawei NetEngine80E Configuration Manual - Reliability page 104

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 3 Configure E-APS.
1.
Issue 02 (2014-09-30)
[PE2-Tunnel1/0/0] ip address unnumbered interface LoopBack0
[PE2-Tunnel1/0/0] tunnel-protocol mpls te
[PE2-Tunnel1/0/0] destination 1.1.1.1
[PE2-Tunnel1/0/0] mpls te tunnel-id 1
[PE2-Tunnel1/0/0] mpls te path explicit-path path
[PE2-Tunnel1/0/0] mpls te reserved-for-binding
[PE2-Tunnel1/0/0] mpls te commit
[PE2-Tunnel1/0/0] quit
[PE2] interface tunnel 2/0/0
[PE2-Tunnel2/0/0] ip address unnumbered interface LoopBack1
[PE2-Tunnel2/0/0] tunnel-protocol mpls te
[PE2-Tunnel2/0/0] destination 5.5.5.5
[PE2-Tunnel2/0/0] mpls te tunnel-id 3
[PE2-Tunnel2/0/0] mpls te reserved-for-binding
[PE2-Tunnel2/0/0] mpls te commit
[PE2-Tunnel2/0/0] quit
# Configure PE3.
[PE3] interface tunnel 1/0/0
[PE3-Tunnel1/0/0] ip address unnumbered interface LoopBack0
[PE3-Tunnel1/0/0] tunnel-protocol mpls te
[PE3-Tunnel1/0/0] destination 1.1.1.1
[PE3-Tunnel1/0/0] mpls te tunnel-id 2
[PE3-Tunnel1/0/0] mpls te path explicit-path path
[PE3-Tunnel1/0/0] mpls te reserved-for-binding
[PE3-Tunnel1/0/0] mpls te commit
[PE3-Tunnel1/0/0] quit
[PE3] interface tunnel 2/0/0
[PE3-Tunnel2/0/0] ip address unnumbered interface LoopBack1
[PE3-Tunnel2/0/0] tunnel-protocol mpls te
[PE3-Tunnel2/0/0] destination 4.4.4.4
[PE3-Tunnel2/0/0] mpls te tunnel-id 3
[PE3-Tunnel2/0/0] mpls te reserved-for-binding
[PE3-Tunnel2/0/0] mpls te commit
[PE3-Tunnel2/0/0] quit
Configure E-APS on PE2, PE3 and APS on CE2.
# Configure PE2.
[PE2] interface atm 1/0/1
[PE2-Atm1/0/1] undo shutdown
[PE2-Atm1/0/1] aps group 1
[PE2-Atm1/0/1] aps working 5.5.5.5 4.4.4.4
[PE2-Atm1/0/1] aps timers 1 180
[PE2-Atm1/0/1] quit
# Configure PE3.
[PE3] interface atm 1/0/2
[PE3-Atm1/0/2] undo shutdown
[PE3-Atm1/0/2] aps group 1
[PE3-Atm1/0/2] aps protect 4.4.4.4 5.5.5.5
[PE3-Atm1/0/2] aps mode one-plus-one bidirection
[PE3-Atm1/0/2] aps revert 5
[PE3-Atm1/0/2] aps timers 1 180
[PE3-Atm1/0/2] quit
# Configure CE2.
<HUAWEI> system-view
[HUAWEI] sysname CE2
[CE2] interface atm 2/0/1
[CE2-Atm2/0/1] aps group 1
[CE2-Atm2/0/1] aps working
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
87