Huawei NetEngine80E Configuration Manual - Reliability page 450

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[RouterA-bfd-session-atob] discriminator remote 2
[RouterA-bfd-session-atob] commit
[RouterA-bfd-session-atob] quit
# Enable BFD on Router B, create a BFD session to detect faults in the link from Router B
toRouter A, and bind an outbound interface to the BFD session.
[RouterB] bfd
[RouterB-bfd] quit
[RouterB] bfd atob bind peer-ipv6 2001:db8::1 interface GigabitEthernet 1/0/0
[RouterB-bfd-session-btoa] discriminator local 2
[RouterB-bfd-session-btoa] discriminator remote 1
[RouterB-bfd-session-btoa] commit
[RouterB-bfd-session-btoa] quit
Step 3 Verify the configuration.
After the configuration, run the display bfd session all verbose command on Router A and
Router B. You can view that a single-hop BFD session has been set up and its status is Up.
Use the display on Router A as an example.
<RouterA> display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 256
--------------------------------------------------------------------------------
Local Discriminator
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer Ip Address
NextHop Ip Address
Bind Interface
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms): -
Local Detect Multi
Echo Passive
Destination Port
Proc interface status
WTR Interval (ms)
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
Session Echo Tx TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
----End
Configuration Files
l
Issue 02 (2014-09-30)
Total UP/DOWN Session Number : 1/0
Configuration file of Router A
#
sysname RouterA
#
ipv6
#
bfd
#
interface GigabitEthernet1/0/0
undo shutdown
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(One Hop) State : Up
: 1
Remote Discriminator
: Asynchronous Mode Without Echo Function
: Interface(GigabitEthernet1/0/0)
: Static
: 2001:db8::2
: 2001:db8::2
: GigabitEthernet1/0/0
: 1
TOS-EXP
: 1000
Min Rx Interval (ms)
Actual Rx Interval (ms): -
: 3
Detect Interval (ms)
: Disable
Acl Number
: 3784
TTL
: Disable
Process PST
: --
: No Diagnostic
: No Application Bind
: --
Session Detect TmrID
: --
Session WTR TmrID
: --
: FSM-0|RCV-0|IF-0|TOKEN-0
: --
5 BFD Configuration
Name : atob
: 2
: 7
: 1000
: -
: --
: 255
: Disable
: --
: --
433

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents