Huawei NetEngine80E Configuration Manual - Reliability page 84

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[RouterA] display cpos-trunk 0
Interface Cpos-Trunk0's state information is:
Operate status: up
--------------------------------------------------------------------------------
PortName
Cpos1/0/0
Cpos2/0/0
# Run the display ppp mp-global command to view the Global-MP-Group configuration. The
command output shows the status of Trunk-Serial interfaces in the Global-MP-Group.
[RouterA] display ppp mp-global
Global-Mp-Group is Global-Mp-Group0
===========Sublinks status begin======
Trunk-Serial0/1:0 physical UP,protocol UP
Trunk-Serial0/2:0 physical UP,protocol UP
===========Sublinks status end========
----End
Configuration Files
Configuration file of Router A
#
sysname RouterA
#
controller Cpos1/0/0
undo shutdown
aps group 1
aps working
cpos-trunk 0
#
controller Cpos2/0/0
undo shutdown
aps group 1
aps protect
aps mode one-plus-one unidirection
cpos-trunk 0
#
interface Cpos-Trunk0
undo shutdown
e1 1 unframed
e1 2 unframed
#
interface Global-Mp-Group0
undo shutdown
#
interface Trunk-Serial0/1:0
undo shutdown
link-protocol ppp
ppp mp-global global-mp-group 0
#
interface Trunk-Serial0/2:0
undo shutdown
link-protocol ppp
ppp mp-global global-mp-group 0
#
return
Issue 02 (2014-09-30)
Number Of Up Port In Trunk: 1
Status
Up
Up
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Active Status
Active
Inactive
3 APS Configuration
67