Huawei NetEngine80E Configuration Manual - Reliability page 224

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Issue 02 (2014-09-30)
[NPE1-Virtual-Ethernet2/0/7] vrrp vrid 4 track admin-vrrp interface virtual-
ethernet2/0/3 vrid 2 unflowdown
[NPE1-Virtual-Ethernet2/0/7] quit
# Configure NPE2.
[NPE2] interface virtual-ethernet2/0/5
[NPE2-Virtual-Ethernet2/0/5] vrrp vrid 3 track admin-vrrp interface virtual-
ethernet2/0/1 vrid 1 unflowdown
[NPE2-Virtual-Ethernet2/0/5] quit
[NPE2] interface virtual-ethernet2/0/7
[NPE2-Virtual-Ethernet2/0/7] vrrp vrid 4 track admin-vrrp interface virtual-
ethernet2/0/3 vrid 2 unflowdown
[NPE2-Virtual-Ethernet2/0/7] quit
After the configuration is complete, run the display vrrp command on NPEs. You can
view that the service VRRP status is the same as the status of the bound mVRRP.
Take NPE1 as an example.
[NPE1] display vrrp
Virtual-Ethernet2/0/7 | Virtual Router 4
state : Backup
Virtual IP : 172.17.1.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
preempt : yes delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0104
Check TTL : YES
Config type : member-vrrp
Virtual-Ethernet2/0/5 | Virtual Router 3
state : Master
Virtual IP : 172.16.1.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
preempt : yes delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0103
Check TTL : YES
Config type : member-vrrp
Virtual-Ethernet2/0/3 | Virtual Router 2
state : Backup
Virtual IP : 192.168.2.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
preempt : yes delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0102
Check TTL : YES
Config type : admin-vrrp
Virtual-Ethernet2/0/1 | Virtual Router 1
state : Master
Virtual IP : 192.168.1.254
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
207