Huawei NetEngine80E Configuration Manual - Reliability page 229

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[CE1-ospf-100-area-0.0.0.0] quit
[CE1-ospf-100] quit
# Configure CE2.
<HUAWEI> system-view
[HUAWEI] sysname CE2
[CE2] interface gigabitethernet1/0/0.1
[CE2-GigabitEthernet1/0/0.1] vlan-type dot1q 102
[CE2-GigabitEthernet1/0/0.1] ip address 172.17.1.1 24
[CE2-GigabitEthernet1/0/0.1] quit
[CE2] ospf 200
[CE2-ospf-200] area 0
[CE2-ospf-200-area-0.0.0.0] network 172.17.1.0 0.0.0.255
[CE2-ospf-200-area-0.0.0.0] quit
[CE2-ospf-200] quit
# Configure CE3.
<HUAWEI> system-view
[HUAWEI] sysname CE3
[CE3] interface gigabitethernet1/0/0
[CE3-GigabitEthernet1/0/0] ip address 172.18.1.1 24
[CE3-GigabitEthernet1/0/0] undo shutdown
[CE3-GigabitEthernet1/0/0] quit
[CE3] ospf 100
[CE3-ospf-100] area 0
[CE3-ospf-100-area-0.0.0.0] network 172.18.1.0 0.0.0.255
[CE3-ospf-100-area-0.0.0.0] quit
[CE3-ospf-100] quit
# Configure CE4.
<HUAWEI> system-view
[HUAWEI] sysname CE4
[CE4] interface gigabitethernet1/0/0
[CE4-GigabitEthernet1/0/0] ip address 172.19.1.1 24
[CE4-GigabitEthernet1/0/0] undo shutdown
[CE4-GigabitEthernet1/0/0] quit
[CE4] ospf 200
[CE4-ospf-200] area 0
[CE4-ospf-200-area-0.0.0.0] network 172.19.1.0 0.0.0.255
[CE4-ospf-200-area-0.0.0.0] quit
[CE4-ospf-200] quit
Step 7 Verify the configuration.
CE1, CE2, CE3, and CE4 can ping through each other.Take CE1 as example:
[CE1] ping 172.18.1.1
PING 172.18.1.1: 56
--- 172.18.1.1 ping statistics ---
# When the link between NPE1 and UPE1 is Down, run the display vrrp command on the NPE.
You can view that the previous backup mVRRP is now the master and the status of the service
VRRP is the same as that of the bound mVRRP. Take NPE1 as an example:
[NPE1] interface gigabitethernet2/0/0
Issue 02 (2014-09-30)
data bytes, press CTRL_C to break
Reply from 172.18.1.1: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 172.18.1.1: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 172.18.1.1: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 172.18.1.1: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 172.18.1.1: bytes=56 Sequence=5 ttl=255 time=28 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
212

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents