Huawei NetEngine80E Configuration Manual - Reliability page 549

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Create VLANs and add interfaces to the corresponding VLAN. For configuration details, see
"Configuration Files" in this section.
Step 2 Create MD 1.
# Create MD 1 on Router A.
<RouterA> system-view
[RouterA] cfm enable
[RouterA] cfm md md1 level 6
# Create MD 1 on Router B, Router C, Router D, Router E, Router F, Router G, Router H, and
Router I.
The configuration is similar to that on Router A.
Step 3 Create and configure MA 1 within MD 1 on all the device except Router G.
# Create and configure MA 1 on Router A within MD 1.
[RouterA-md-md1] ma ma1
[RouterA-md-md1-ma-ma1] map vlan 2
[RouterA-md-md1-ma-ma1] quit
# Create and configure MA 1 on Router B, Router C, Router D, Router E, Router F, Router H,
and Router I within MD 1.
The configuration is similar to that on Router A.
Step 4 Create and configure MA 2 within MD 1 on all the device except Router E and Router I.
# Create and configure MA 2 on Router A within MD 1.
[RouterA-md-md1] ma ma2
[RouterA-md-md1-ma-ma2] map vlan 3
[RouterA-md-md1-ma-ma2] quit
[RouterA-md-md1] quit
# Create and configure MA 2 on Router B, Router C, Router D, Router F, Router G, and Router
H within MD 1.
The configuration is similar to that on Router A.
Step 5 Create MD 2 on Router A, Router B, Router C, and Router D. Create and configure MA 3 within
MD 2.
# Create MD 2 on Router A. Create and configure MA 3 within MD 2.
[RouterA] cfm md md2 level 4
[RouterA-md-md2] ma ma3
[RouterA-md-md2-ma-ma3] map vlan 4
[RouterA-md-md2-ma-ma3] quit
[RouterA-md-md2] quit
Issue 02 (2014-09-30)
MD 1 at level 6
MD 2 at level 4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
532