Huawei NetEngine80E Configuration Manual - Reliability page 221

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Issue 02 (2014-09-30)
[UPE2] vsi vsi2 static
[UPE2-vsi-vsi2] pwsignal ldp
[UPE2-vsi-vsi2-ldp] vsi-id 102
[UPE2-vsi-vsi2-ldp] peer 3.3.3.9
[UPE2-vsi-vsi2-ldp] peer 4.4.4.9
[UPE2-vsi-vsi2-ldp] quit
[UPE2-vsi-vsi2] encapsulation ethernet
[UPE2-vsi-vsi2] track admin-vsi admin-vsi2
[UPE2-vsi-vsi2] quit
[UPE2] interface gigabitethenet 1/0/2.1
[UPE2-GigabitEthernet1/0/2.1] vlan-type dot1q 102
[UPE2-GigabitEthernet1/0/2.1] l2 binding vsi vsi2
[UPE2-GigabitEthernet1/0/2.1] quit
An NPE does not need to learn the MAC addresses of other NPEs, so it is recommended
that NPEs connect to the mVSIs on UPEs through VLL. The VC ID must be the same as
the ID of the VSI that the NPE accesses.
# Configure NPE1.
[NPE1] interface virtual-ethernet2/0/4.1
[NPE1-Virtual-Ethernet2/0/4.1] vlan-type dot1q 1
[NPE1-Virtual-Ethernet2/0/4.1] mpls l2vc 1.1.1.9 101
[NPE1-Virtual-Ethernet2/0/4.1] quit
[NPE1] interface virtual-ethernet2/0/6.1
[NPE1-Virtual-Ethernet2/0/6.1] vlan-type dot1q 1
[NPE1-Virtual-Ethernet2/0/6.1] mpls l2vc 2.2.2.9 102
[NPE1-Virtual-Ethernet2/0/6.1] quit
# Configure NPE2.
[NPE2] interface virtual-ethernet2/0/4.1
[NPE2-Virtual-Ethernet2/0/4.1] vlan-type dot1q 1
[NPE2-Virtual-Ethernet2/0/4.1] mpls l2vc 1.1.1.9 101
[NPE2-Virtual-Ethernet2/0/4.1] quit
[NPE2] interface virtual-ethernet2/0/6.1
[NPE2-Virtual-Ethernet2/0/6.1] vlan-type dot1q 1
[NPE2-Virtual-Ethernet2/0/6.1] mpls l2vc 2.2.2.9 102
[NPE2-Virtual-Ethernet2/0/6.1] quit
After the configuration is complete, run the display vsi command on UPEs. You can view
that the VSI State in the output is up.
Take UPE1 as an example.
[UPE1] display vsi name vsi1
Total VSI number is 1, 1 is up, 0 is down, 1 is LDP mode, 0 is BGP mode
Vsi
Name
--------------------------------------------------------------------------
vsi1
vsi1
Run the display mpls l2vc interface command on NPEs. You can view that the VC
State in the output is up.
Take NPE1 as an example.
[NPE1] display mpls l2vc interface virtual-ethernet2/0/4.1
*client interface
Administrator PW
session state
AC status
VC state
VC ID
VC type
destination
local group ID
local VC label
local AC OAM State
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mem PW Mac
Disc Type Learn
static ldp unqualify
static ldp unqualify
: Virtual-Ethernet2/0/4.1 is up
: no
: up
: up
: up
: 101
: vlan
: 1.1.1.9
: 0 remote group ID
: 140288 remote VC label
: up
4 VRRP Configuration
Encap Mtu Vsi
Type Value State
vlan 1500 up
ethernet 1500 up
: 0
: 140292
204