Huawei NetEngine80E Configuration Manual - Reliability page 217

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
2.
Issue 02 (2014-09-30)
# Configure NPE2.
[NPE2] ospf
[NPE2-ospf-1] area 0
[NPE2-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[NPE2-ospf-1-area-0.0.0.0] network 10.4.1.0 0.0.0.255
[NPE2-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0
[NPE2-ospf-1-area-0.0.0.0] quit
[NPE2-ospf-1] quit
After the configuration is complete, run the display ospf routing command. You can view
that the UPE and NPE can learn the loopback1 route of each other.
Take NPE1 as an example.
[NPE1] display ospf routing
OSPF Process 1 with Router ID 3.3.3.9
Routing Tables
Routing for Network
Destination Cost
10.3.1.0/24 1
10.2.1.0/24 3
4.4.4.9/32 4
4.4.4.9/32 4
10.4.1.0/24 3
3.3.3.9/32 1
2.2.2.9/32 2
10.1.1.0/24 1
1.1.1.9/32 2
Total Nets: 9
Intra Area: 9 Inter Area: 0
Configure the basic MPLS functions and MPLS LDP on the UPEs and NPEs. Specify the
LSR-ID as loopback interface address, and set up LSPs.
# Configure UPE1.
[UPE1] mpls lsr-id 1.1.1.9
[UPE1] mpls
[UPE1-mpls] quit
[UPE1] mpls ldp
[UPE1-mpls-ldp] quit
[UPE1] interface gigabitethernet 1/0/0
[UPE1-GigabitEthernet1/0/0] mpls
[UPE1-GigabitEthernet1/0/0] mpls ldp
[UPE1-GigabitEthernet1/0/0] quit
[UPE1] interface gigabitethernet 1/0/1
[UPE1-GigabitEthernet1/0/1] mpls
[UPE1-GigabitEthernet1/0/1] mpls ldp
[UPE1-GigabitEthernet1/0/1] quit
# Configure UPE2.
[UPE2] mpls lsr-id 2.2.2.9
[UPE2] mpls
[UPE2-mpls] quit
[UPE2] mpls ldp
[UPE2-mpls-ldp] quit
[UPE2] interface gigabitethernet 1/0/0
[UPE2-GigabitEthernet1/0/0] mpls
[UPE2-GigabitEthernet1/0/0] mpls ldp
[UPE2-GigabitEthernet1/0/0] quit
[UPE2] interface gigabitethernet 1/0/1
[UPE2-GigabitEthernet1/0/1] mpls
[UPE2-GigabitEthernet1/0/1] mpls ldp
[UPE2-GigabitEthernet1/0/1] quit
# Configure NPE1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type NextHop
Stub 10.3.1.2
Stub 10.1.1.1
Stub 10.1.1.1
Stub 10.3.1.1
Stub 10.3.1.1
Stub 3.3.3.9
Stub 10.3.1.1
Stub 10.1.1.2
Stub 10.1.1.1
ASE: 0 NSSA: 0
4 VRRP Configuration
AdvRouter Area
3.3.3.9 0.0.0.0
1.1.1.9 0.0.0.0
4.4.4.9 0.0.0.0
4.4.4.9 0.0.0.0
2.2.2.9 0.0.0.0
3.3.3.9 0.0.0.0
2.2.2.9 0.0.0.0
3.3.3.9 0.0.0.0
1.1.1.9 0.0.0.0
200