Huawei NetEngine80E Configuration Manual - Reliability page 988

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
For details about how to configure a bidirectional LSP between T-PEs, see "Configuring a Static
Bidirectional LSP" in the HUAWEI NetEngine80E/40E Router Configuration Guide-MPLS or
information in the configuration files of this configuration example.
Step 2 Create an ME and bind it to a bidirectional LSP.
# Create an ME named test on LSRA and bind the ME to Tunnel 1/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRA
[LSRA] mpls-tp meg test
[LSRA-mpls-tp-meg-test] me te interface tunnel 1/0/0 mep-id 1 remote-mep-id 2
# Create an ME named test on LSRC and bind the ME to Tunnel 2/0/0.
<HUAWEI> system-view
[HUAWEI] sysname LSRC
[LSRC] mpls-tp meg test
[LSRC-mpls-tp-meg-test] me te interface tunnel 2/0/0 mep-id 2 remote-mep-id 1
Step 3 Enable CC on the MEP and RMEP.
# Enable CC on LSRA.
[LSRA-mpls-tp-meg-test] cc send enable
[LSRA-mpls-tp-meg-test] cc receive enable
# Enable CC on LSRC.
[LSRC-mpls-tp-meg-test] cc send enable
[LSRC-mpls-tp-meg-test] cc receive enable
Step 4 Enable two-way DM.
[LSRA-mpls-tp-meg-test] delay-measure two-way
Two-way delay measure statistics
delay(us):
182
182
182
183
182
The Max delay:183, The Max delay variation:1
The Min delay:182, The Min delay variation:0
The delay average:182, The delay variation average:1
Total sent Packets Number:5, Total received Packets Number: 5
----End
Configuration Files
l
Issue 02 (2014-09-30)
delay variation(us):
--
0
0
1
1
Configuration file of LSRA
#
sysname LSRA
#
mpls lsr-id 1.1.1.1
mpls
mpls te
#
bidirectional static-cr-lsp ingress Tunnel1/0/0
forward nexthop 2.1.1.2 out-label 20 bandwidth ct0 10000
backward in-label 20
#
interface Pos1/0/0
undo shutdown
ip address 2.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 100000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MPLS-TP OAM Configuration
971