Huawei NetEngine80E Configuration Manual - Reliability page 444

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Destination/Mask
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet2/0/0.1
[RouterA] ping 192.168.1.1
PING 192.168.1.1: 56
--- 192.168.1.1 ping statistics ---
Step 3 Configure the Layer 2 forwarding function on Switch 2.
<HUAWEI> system-view
[HUAWEI] sysname Switch2
[Switch2] vlan 10
[Switch2-vlan10] port gigabitethernet 2/0/0
[Switch2-vlan10] quit
[Switch2] interface gigabitethernet 1/0/0
[Switch2-GigabitEthernet1/0/0] undo shutdown
[Switch2-GigabitEthernet1/0/0] port trunk allow-pass vlan 10
[Switch2-GigabitEthernet1/0/0] quit
Step 4 Configure QinQ to allow Switch 2 to send packets with double tags to Router A and Router B.
<HUAWEI> system-view
[HUAWEI] sysname Switch1
[Switch1] vlan 100
[Switch1-vlan100] quit
[Switch1] interface gigabitethernet 1/0/0
[Switch1-GigabitEthernet1/0/0] port vlan-stacking vlan 10 stack-vlan 100
[Switch1-GigabitEthernet1/0/0] undo shutdown
[Switch1-GigabitEthernet1/0/0] quit
[Switch1] interface gigabitethernet 1/0/1
[Switch1-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[Switch1-GigabitEthernet1/0/1] undo shutdown
[Switch1-GigabitEthernet1/0/1] quit
[Switch1] interface gigabitethernet 1/0/2
[Switch1-GigabitEthernet1/0/2] port trunk allow-pass vlan 100
[Switch1-GigabitEthernet1/0/2] undo shutdown
[Switch1-GigabitEthernet1/0/2] quit
Step 5 Configure sub-interfaces for QinQ VLAN tag termination.
# Configure Router A.
[RouterA] interface gigabitethernet 2/0/0.1
[RouterA-GigabitEthernet2/0/0.1] control-vid 1 qinq-termination
[RouterA-GigabitEthernet2/0/0.1] qinq termination pe-vid 100 ce-vid 10
# Configure Router B.
[RouterB] interface gigabitethernet 2/0/0.1
[RouterB-GigabitEthernet2/0/0.1] control-vid 1 qinq-termination
Issue 02 (2014-09-30)
Proto
192.168.2.0/24 Direct 0
192.168.2.1/32 Direct 0
192.168.1.0/24 OSPF
10.1.1.0/24 Direct 0
10.1.1.1/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
data bytes, press CTRL_C to break
Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=254 time=7 ms
Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=254 time=5 ms
Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=254 time=8 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/4/8 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Pre Cost Flags NextHop
0 D
0 D
10 2 D
0 D
0 D
0 D
0 D
5 BFD Configuration
Interface
192.168.2.1
127.0.0.1
192.168.2.2
10.1.1.1
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
427