Huawei NetEngine80E Configuration Manual - Reliability page 304

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Procedure
Step 1 Assign IP addresses to interfaces on Router A. The configuration of Router A is similar to the
configurations of the switch, Router B, and Router C. For details about configurations, see the
configuration files.
# Assign IP addresses to GE 1/0/0 and GE 2/0/0.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] interface gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] ip address 10.1.1.1 24
[RouterA-GigabitEthernet1/0/0] quit
[RouterA] interface gigabitethernet 2/0/0
[RouterA-GigabitEthernet2/0/0] ip address 192.168.1.1 24
[RouterA-GigabitEthernet2/0/0] quit
Step 2 Configure basic functions of a VRRP backup group.
# Configure a VRRP backup group with VRID of 1 on Router A and set the VRRP priority value
of Router A to 120 to allow Router A to function as the master.
[RouterA] interface gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] vrrp vrid 1 virtual-ip 10.1.1.10
[RouterA-GigabitEthernet1/0/0] vrrp vrid 1 priority 120
[RouterA-GigabitEthernet1/0/0] vrrp vrid 1 preempt-mode timer delay 20
[RouterA-GigabitEthernet1/0/0] quit
# Configure a VRRP backup group with VRID of 1 on Router B.
[RouterB] interface gigabitethernet 1/0/0
[RouterB-GigabitEthernet1/0/0] vrrp vrid 1 virtual-ip 10.1.1.10
[RouterB-GigabitEthernet1/0/0] quit
After completing the preceding configurations, run the display vrrp command on Router A and
Router B. The VRRP status of Router A is Master, and that of Router B is Backup.
[RouterA] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
[RouterB] display vrrp
GigabitEthernet1/0/0 | Virtual Router 1
Issue 02 (2014-09-30)
State : Master
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES Delay Time : 20 s
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Backup-forward : disabled
Create time : 2011-06-08 15:16:38
Last change time : 2011-06-08 15:16:42
State : Backup
Virtual IP : 10.1.1.10
Master IP : 10.1.1.1
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
Preempt : YES Delay Time : 0 s
TimerRun : 1 s
TimerConfig : 1 s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
287