Huawei NetEngine80E Configuration Manual - Reliability page 716

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE1] display mpls oam ingress all verbose
--------------------------------------------------------------------------------
Verbose information about NO.1 OAM at the ingress
--------------------------------------------------------------------------------
lsp basic information:
---------------------------------------
Tunnel-name
Lsp signal status
Lsp establish type
Lsp ingress lsr-id
Lsp tnl-id
Lsp-id
OAM detect information:
---------------------------------------
Type
Frequency
Detect-state
Defect-state
Available-state
Unavailable time (s): 0
Packet-priority
--------------------------------------------------------------------------------
Total OAM Num:
Total Start OAM Num:
Total Defect OAM Num:
Total Unavailable OAM Num:
[PE3] display mpls oam egress all verbose
--------------------------------------------------------------------------------
Verbose information about NO.1 OAM at the egress
--------------------------------------------------------------------------------
lsp basic information:
---------------------------------------
Lsp name
Lsp signal status
Lsp establish type
Lsp incoming Label
Lsp ingress lsr-id
Lsp tnl-id
Lsp-id
Lsp Incoming-int
OAM detect information:
---------------------------------------
Type
Frequency
Detect-state
Defect-state
Available-state
Unavailable time (s): 0
--------------------------------------------------------------------------------
Total OAM Num:
Total Start OAM Num:
Total Defect OAM Num:
Total Unavailable OAM Num:
Step 6 Configure EFM functions.
Issue 02 (2014-09-30)
: Tunnel2/0/0
: Up
: Static lsp
: 1.1.1.1
: 200
: 1
: CV
: 1 s
: Start
: Non-defect
: Available
: 7
1
1
0
0
: oamlsp
: Up
: Static lsp
: 30
: 1.1.1.1
: 200
: --
: GigabitEthernet1/0/1
: CV
: 1 s
: Start
: Non-defect
: Available
1
1
0
0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
oam basic information:
--------------------------------------
OAM-Index : 256
OAM select board : 1
Enable-state : Manual enable
Ttsi/lsr-id : 1.1.1.1
Ttsi/tunnel-id : 200
oam backward information:
--------------------------------------
Share attribute : Share
Lsp-name : --
Lsp ingress lsr-id : --
Lsp tnl-id : --
Lsp-id : --
Lsp-inLabel : --
Lsp signal status : --
oam basic information:
--------------------------------------
OAM-Index : 256
OAM select board : 1
Enable-state : --
Auto-protocol : Enable
Auto-overtime (s) : 300
Ttsi/lsr-id : 1.1.1.1
Ttsi/tunnel-id : 200
oam backward information:
--------------------------------------
Tunnel name : Tunnel1/0/2
Share attribute : Private
Lsp signal status : Up
Bdi-frequency : Detect frequency
699