Huawei NetEngine80E Configuration Manual - Reliability page 78

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
------------------------------------------------------------------------
Group Work-Channel Protect-Channel Wtr W-State P-State Switch-Cmd Switch-Result
------------------------------------------------------------------------
1
------------------------------------------------------------------------
total entry: 1
<PE2> display cpos-trunk 1
Interface Cpos-Trunk1's state information is:,
Operate status: up
--------------------------------------------------------------------------------
PortName
Cpos3/0/1
Cpos3/0/2
Run the display mpls l2vc command on PEs. You can view that the status of the PW is Up and
has not been influenced by the fault of CPOS 3/0/1.
Use the display on PE1 as an example:
<PE1> display mpls l2vc interface serial2/0/1:0
*client interface
session state
AC state
VC state
VC ID
VC type
destination
local group ID
remote group ID
local VC label
remote VC label
TDM encapsulation number : 40
jitter-buffer
idle-code
rtp-header
local AC OAM State
local PSN State
local forwarding state : forwarding
local status code
remote AC OAM state
remote PSN state
remote forwarding state: forwarding
remote statuscode
BFD for PW
manual fault
active state
forwarding entry
link state
local VC MTU
remote VC MTU
local VCCV
remote VCCV
local control word
remote control word
tunnel policy name
traffic behavior name
PW template name
primary or secondary
VC tunnel/token info
create time
up time
last change time
VC last up time
VC total up time
Issue 02 (2014-09-30)
Unidirection, 1+1 mode, No Revert mode
No Request on Both Working and Protection Side
Cpos 3/0/1
Cpos 3/0/2
Number Of Up Port In Trunk: 2
Status
Active Status
Down
Inactive
Up
Active
: Serial2/0/1:0 is up
: up
: up
: up
: 100
: CESoPSN basic mode
: 192.3.3.3
: 0
: 0
: 146432
: 145287
: 20
: FF
: disable
: up
: up
: 0x0
: up
: up
: 0x0
: unavailable
: not set
: active
: not exist
: up
: 1500
: 1500
: alert lsp-ping bfd
: none
: disable
: disable
: --
: --
: --
: primary
: 0 tunnels/tokens
: 0 days, 4 hours, 48 minutes, 51 seconds
: 0 days, 4 hours, 02 minutes, 39 seconds
: 0 days, 0 hours, 39 minutes, 29 seconds
: 2008/12/26 12:02:49
: 0 days, 4 hours, 02 minutes, 39 seconds
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NA
sf
ok
3 APS Configuration
NA
switch
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents