Huawei NetEngine80E Configuration Manual - Reliability page 678

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
----End
Issue 02 (2014-09-30)
2. Run:
interface interface-type interface-number
The view of an interface at one end of a link is displayed.
3. Run:
efm error-frame period period
The period of detecting errored frame is set on the interface.
By default, the period of detecting errored frames is 1 second on the interface.
4. Run:
efm error-frame threshold threshold
The threshold for the number of errored frames that are detected in the specified period
is set on the interface.
By default, the threshold for the number of errored frames that are detected in the
specified period is 1 on the interface.
5. Run:
efm error-frame notification enable
The interface is enabled to report errored frames.
By default, an interface is disabled from reporting errored frames.
Detect errored frame second events.
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The view of an interface at one end of a link is displayed.
3. Run:
efm error-frame-second period period
The period of detecting errored frame seconds is set on the interface.
By default, the period of detecting errored frame seconds is 60 seconds on the
interface.
4. Run:
efm error-frame-second threshold threshold
The threshold for the number of errored frame seconds that are detected in the specified
period is set on the interface.
By default, the threshold for the number of errored frame seconds that are detected in
the specified period is 1 on the interface.
5. Run:
efm error-frame-second notification enable
The interface is enabled to report errored frame seconds.
By default, an interface is disabled from reporting errored frame seconds.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
661