Huawei NetEngine80E Configuration Manual - Reliability page 435

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
l
l
Procedure
Step 1 Configure the interface mode as user termination.
# Configure Router A.
[RouterA] interface gigabitethernet 2/0/0
[RouterA-GigabitEthernet2/0/0] undo shutdown
[RouterA-GigabitEthernet2/0/0] mode user-termination
[RouterA-GigabitEthernet2/0/0] quit
# Configure Router B.
[RouterB] interface gigabitethernet 2/0/0
[RouterB-GigabitEthernet2/0/0] undo shutdown
[RouterB-GigabitEthernet2/0/0] mode user-termination
[RouterB-GigabitEthernet2/0/0] quit
Step 2 Configure an IGP to ensure connectivity between devices.
Assign IP addresses to interfaces as shown in
Router B, and Router C. OSPF is adopted in this example.
# Configure Router A.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] interface gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] undo shutdown
[RouterA-GigabitEthernet1/0/0] ip address 192.168.2.1 24
[RouterA-GigabitEthernet1/0/0] quit
[RouterA] interface gigabitethernet 2/0/0.1
[RouterA-GigabitEthernet2/0/0.1] undo shutdown
[RouterA-GigabitEthernet2/0/0.1] ip address 10.1.1.1 24
[RouterA-GigabitEthernet2/0/0.1] quit
[RouterA] ospf 1
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.2.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure Router B.
<HUAWEI> system-view
[HUAWEI] sysname RouterB
[RouterB] interface gigabitethernet 1/0/0
[RouterB-GigabitEthernet1/0/0] undo shutdown
[RouterB-GigabitEthernet1/0/0] ip address 192.168.1.1 24
[RouterB-GigabitEthernet1/0/0] quit
[RouterB] interface gigabitethernet 2/0/0.1
[RouterB-GigabitEthernet2/0/0.1] undo shutdown
[RouterB-GigabitEthernet2/0/0.1] ip address 10.1.1.2 24
[RouterB-GigabitEthernet2/0/0.1] quit
[RouterB] ospf 1
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
Issue 02 (2014-09-30)
Name of the BFD session
ID and virtual IP address of the VRRP backup group
Tag value of sub-interfaces for dot1q termination
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-15. Configure an IGP on Router A,
5 BFD Configuration
418