Huawei NetEngine80E Configuration Manual - Reliability page 99

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Table 3-1 Interfaces and IP address
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Issue 02 (2014-09-30)
Devices Interface No.
GE2/0/1
PE1 GE2/0/2
Loopback0
GE2/0/1
P1 GE3/0/2
Loopback0
GE2/0/2
P2 GE3/0/2
Loopback0
GE3/0/2
GE2/0/2
PE2 Loopback0
Loopback1
Loopback2
GE3/0/2
GE2/0/2
PE3 Loopback0
Loopback1
Loopback2
Configure IP addresses and a routing protocol to make devices routable.
Configure MPLS TE tunnels and their explicit paths, ensuring that traffic flows through
specified paths.
Configure E-APS on PE2 and PE3 and single-chassis APS on CE2, implementing E-APS
1+1 bidirectional protection on the AC side.
Establish the primary and secondary PWs connecting PE1 to PE2 and PE3, and two bypass
PWs between PE2 and PE3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
IP Address of the Interfaces
10.1.1.1/24
10.1.2.1/24
1.1.1.1/32
10.1.1.2/24
10.1.4.1/24
2.2.2.2/32
10.1.2.2/24
10.1.5.1/24
3.3.3.3/32
10.1.4.2/24
106.1.1.1/24
4.4.4.4/32
4.4.4.1/32
4.4.4.2/32
10.1.5.2/24
106.1.1.2/24
5.5.5.5/32
5.5.5.1/32
5.5.5.2/32
82