Huawei NetEngine80E Configuration Manual - Reliability page 997

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Configuration Files
l
l
Issue 02 (2014-09-30)
Configuration file of PE1
#
sysname PE1
#
mpls lsr-id 1.1.1.1
mpls
mpls te
#
mpls l2vpn
#
bidirectional static-cr-lsp ingress Tunnel1/0/0
forward nexthop 2.1.1.2 out-label 20 bandwidth ct0 10000
backward in-label 20
#
pw-template tpatoc
peer-address 3.3.3.3
control-word
tnl-policy tpatoc
#
interface Pos1/0/0
undo shutdown
ip address 2.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 100000
mpls te bandwidth bc0 100000
#
interface POS1/0/0.1
vlan-type dot1q 1
mpls
mpls static-l2vc pw-template tpatoc 30000 transmit-vpn-label 101 receive-vpn-
label 101
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 2.2.2.2
mpls te signal-protocol cr-static
mpls te tunnel-id 100
mpls te bidirectional
mpls te reserved-for-binding
mpls te commit
#
ip route-static 2.2.2.2 255.255.255.255 2.1.1.2
ip route-static 3.3.3.3 255.255.255.255 2.1.1.2
#
tunnel-policy tpatoc
tunnel binding destination 2.2.2.2 te Tunnel1/0/0
#
mpls-tp meg test
me l2vc peer-ip 3.3.3.3 vc-id 30000 vc-type vlan mep-id 1 remote-mep-id 2
#
return
Configuration file of PE2
#
sysname PE2
#
mpls lsr-id 2.2.2.2
mpls
mpls te
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MPLS-TP OAM Configuration
980