Huawei NetEngine80E Configuration Manual - Reliability page 417

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fcc7-565a
The Vendor PN is HFBR-5710L
Port BW: 1G, Transceiver max BW: 1G, Transceiver Mode: MultiMode
WaveLength: 850nm, Transmission Distance: 550m
Loopback:none, full-duplex mode, negotiation: disable, Pause Flowcontrol:Send and
Receive Enable
Last physical up time
Last physical down time : 2008-10-16 09:18:42
Current system time: 2010-08-30 18:02:12
Statistics last cleared:never
----End
Configuration Files
l
l
Issue 02 (2014-09-30)
: 2008-10-16 09:18:48
Last 300 seconds input rate: 56 bits/sec, 0 packets/sec
Last 300 seconds output rate: 88 bits/sec, 0 packets/sec
Input: 420904 bytes, 5802 packets
Output: 1250456 bytes, 13926 packets
Input:
Unicast: 461 packets, Multicast: 5331 packets
Broadcast: 10 packets, Jumbo: 0 packets
CRC: 3 packets, Symbol: 0 packets
Overrun: 0 packets, InRangeLength: 0 packets
LongPacket: 0 packets, Jabber: 0 packets,
Fragment: 0 packets, Undersized Frame: 0 packets
RxPause: 0 packets
Output:
Unicast: 8622 packets, Multicast: 5293 packets
Broadcast: 11 packets, Jumbo: 0 packets
Lost: 0 packets, Overflow: 0 packets, Underrun: 0 packets
TxPause: 0 packets
Unknown Vlan: 0 packets
Configuration file of Router A
#
sysname RouterA
#
bfd
#
interface GigabitEthernet1/0/0
undo shutdown
ip address 10.1.1.1 255.255.255.0
#
bfd atob bind peer-ip default-ip interface GigabitEthernet1/0/0
discriminator local 10
discriminator remote 20
wtr 5
process-pst
process-interface-status
commit
#
return
Configuration file of Router B
#
sysname RouterB
#
bfd
#
interface GigabitEthernet1/0/0
undo shutdown
ip address 10.1.1.2 255.255.255.0
#
bfd btoa bind peer-ip default-ip interface GigabitEthernet1/0/0
discriminator local 20
discriminator remote 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
Alignment: 0 packets
400