Huawei NetEngine80E Configuration Manual - Reliability page 727

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
output on Router B also shows that the VRRP backup group is tracking the peer BFD session
and the peer BFD session goes Up.
[RouterA] display vrrp
GigabitEthernet1/0/1 | Virtual Router 10
[RouterB] display vrrp
GigabitEthernet1/0/1 | Virtual Router 10
Step 6 Associate the VRRP backup group with the EFM session.
# Configure Router A.
[RouterA] interface gigabitethernet 1/0/1
[RouterA-GigabitEthernet1/0/1] vrrp vrid 10 track efm interface
GigabitEthernet1/0/1
[RouterA-GigabitEthernet1/0/1] quit
Step 7 Verify the configuration.
# Run the shutdown command on GE 1/0/1 of Router A to simulate that GE 1/0/1 of Router A
fails.
[RouterA] interface gigabitethernet 1/0/1
[RouterA-GigabitEthernet1/0/1] shutdown
[RouterA-GigabitEthernet1/0/1] quit
# Run the display vrrp command on Router A. The VRRP status is Initialize on Router A.
[RouterA] display vrrp
GigabitEthernet1/0/1 | Virtual Router 10
Issue 02 (2014-09-30)
State : Master
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 160
PriorityConfig : 160
MasterPriority : 160
Preempt : YES Delay Time : 0 s
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0110
Check TTL : YES
Config type : normal-vrrp
Backup-forward : disabled
Create time : 2010-06-22 17:32:56
Last change time : 2010-06-22 17:33:00
State : Backup
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 140
PriorityConfig : 140
MasterPriority : 160
Preempt : YES Delay Time : 0 s
TimerRun : 1 s
TimerConfig : 1 s
Auth Type : NONE
Virtual Mac : 0000-5e00-0110
Check TTL : YES
Config type : normal-vrrp
Backup-forward : disabled
Track BFD : 2 Priority increased : 40
BFD-Session State : UP
Create time : 2010-06-22 17:33:00
Last change time : 2010-06-22 17:33:04
State : Initialize
Virtual IP : 10.1.1.111
Master IP : 0.0.0.0
PriorityRun : 160
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
710