Huawei NetEngine80E Configuration Manual - Reliability page 168

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Issue 02 (2014-09-30)
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The view of the interface where the fast VRRP backup group is configured is
displayed.
3. Run:
admin-vrrp vrid virtual-router-id
The fast VRRP backup group is configured as an mVRRP backup group.
4. Run:
quit
The system view is displayed.
Bind a service interface to the mVRRP backup group.
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The service interface view is displayed.
3. Run:
track admin-vrrp interface interface-type interface-number vrid virtual-
router-id
The service interface is bound to the mVRRP backup group.
Bind a PW to the mVRRP backup group.
1. Run:
system-view
The system view is displayed.
2. Run:
vsi vsi-name static
The virtual switch instance (VSI) view is displayed.
3. Run:
pwsignal ldp
The VSI-LDP view is displayed.
4. Run:
peer peer-address [ negotiation-vc-id vc-id ] track admin-vrrp interface
interface-type interface-number vrid virtual-router-id
The PW is bound to the mVRRP backup group.
NOTE
A peer must exist before the PW is bound to the mVRRP backup group. For information about
PW configurations, see the chapter "VPLS Convergence Configuration" in HUAWEI
NetEngine80E/40E Router Configuration Guide - VPN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
151