Huawei NetEngine80E Configuration Manual - Reliability page 804

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
----End
Checking the Configurations
Run the display y1731 statistic-type twoway-delay md md-name ma ma-name [ count count-
value ] command on the device that initiates two-way frame delay measurement to check
statistics about the delay in bidirectional frame transmission.
Run the display y1731 statistic-type command to view statistics about the delay in bidirectional
frame transmission.
<HUAWEI>display y1731 statistic-type twoway-delay md md1 ma ma1
Latest two-way delay statistics:
--------------------------------------------------------------------------------
Index
--------------------------------------------------------------------------------
Issue 02 (2014-09-30)
Table 8-64 Enabling the DMM frame send function
Scenario Procedure
Point-to- Performance statistics collection not based on a test instance:
point
Run:
scenario
delay-measure two-way continual send mep mep-id { mac mac-
address | remote-mep mep-id } interval interval peer-ip peer-
ip [ vc-id vc-id ]
Proactive two-way frame delay measurement is configured for a PW.
Performance statistics collection based on a specified test instance:
1. Run:
2. Run:
Point-to- 1. Run:
multipoint
scenario
2. Run:
NOTE
Currently, you can check the configuration of two-way frame delay measurement on in VPLS networking
by using the NMS that matches the current device version.
Delay(usec)
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
test-id test-id
A test instance is configured.
delay-measure two-way continual send test-id test-id
Proactive two-way frame delay measurement is configured for a
PW.
test-id test-id
A test instance is configured.
delay-measure two-way continual send test-id test-id
Proactive two-way frame delay measurement is configured for a
PW.
Delay variation(usec)
-
0
0
0
0
0
0
8 Ethernet OAM Configuration
787