Huawei NetEngine80E Configuration Manual - Reliability page 108

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
1
--------------------------------------------------------------------------------
[PE3] display aps group 1
APS Group 1: APS working channel is 4.4.4.4
--------------------------------------------------------------------------------
Group Work-Channel Protect-Channel Wtr W-State P-State Switch-Cmd Switch-Result
--------------------------------------------------------------------------------
1
--------------------------------------------------------------------------------
[PE2] display atm-trunk 1
Interface Atm-Trunk1's state information is:
Operate status: up
--------------------------------------------------------------------------------
PortName
Atm1/0/1
[PE3] display atm-trunk 1
Interface Atm-Trunk1's state information is:
Operate status: up
--------------------------------------------------------------------------------
PortName
Atm1/0/2
----End
Configuration Files
l
Issue 02 (2014-09-30)
Atm1/0/1 5.5.5.5
Atm1/0/2 protection channel 0(Inactive)
Bidirection, 1+1 mode, Revert time(1 minutes)
KeepAlive Timer: 1(seconds), Hold Timer: 3(seconds)
No Request on Both Working and Protection Side
4.4.4.4 Atm1/0/2
Number Of Up Port In Trunk: 1
Status Active Status
Up Active
Number Of Up Port In Trunk: 1
Status Active Status
Up Inactive
Configuration file of PE1
#
sysname PE1
isis 1
is-level level-1
network-entity 1111.1111.1111.1111.00
graceful-restart
cost-style wide-compatible
timer spf 1 1 50
traffic-eng level-1-2
#
interface gigabitEthernet 2/0/1
isis enable 1
mpls
mpls te
interface gigabitEthernet 2/0/2
isis enable 1
mpls
mpls te
#
interface loopBack 0
ip address 1.1.1.1 32
mpls lsr-id 1.1.1.1
mpls
mpls te
#
explicit-path path1
next hop 10.1.1.2
next hop 10.1.4.2
next hop 4.4.4.4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NA ok ok
1 ok ok NA
3 APS Configuration
NA idle
idle
91