Huawei NetEngine80E Configuration Manual - Reliability page 385

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[RouterA] bfd
[RouterA-bfd] quit
[RouterA] bfd atob bind peer-ip 10.1.1.2 interface pos 1/0/0
[RouterA-bfd-session-atob] discriminator local 1
[RouterA-bfd-session-atob] discriminator remote 2
[RouterA-bfd-session-atob] wtr 5
[RouterA-bfd-session-atob] commit
[RouterA-bfd-session-atob] quit
# Enable BFD on Router B, set up the BFD session between Router B and Router A, and bind
Router B's interface to the BFD session.
[RouterB] bfd
[RouterB-bfd] quit
[RouterB] bfd btoa bind peer-ip 10.1.1.1 interface pos 1/0/0
[RouterB-bfd-session-btoa] discriminator local 2
[RouterB-bfd-session-btoa] discriminator remote 1
[RouterB-bfd-session-btoa] wtr 5
[RouterB-bfd-session-btoa] commit
[RouterB-bfd-session-btoa] quit
Step 3 Verify the configuration.
After the configuration is complete, run the display bfd session all verbose command on Router
A and Router B. You can view that a single-hop BFD session has been created and that its status
is Up.
Use the display on Router A as an example.
<RouterA> display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 256
--------------------------------------------------------------------------------
Local Discriminator
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer Ip Address
NextHop Ip Address
Bind Interface
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms): 10
Local Detect Multi
Echo Passive
Destination Port
Proc interface status
WTR Interval (ms)
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
Session Echo Tx TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
----End
Configuration Files
l
Issue 02 (2014-09-30)
Total UP/DOWN Session Number : 1/0
Configuration file of Router A
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(One Hop) State : Up
: 1 Remote Discriminator
: Asynchronous Mode Without Echo Function
: Interface(Pos1/0/0)
: Static
: 10.1.1.2
: 10.1.1.2
: Pos1/0/0
: 1 TOS-EXP
: 10 Min Rx Interval (ms)
Actual Rx Interval (ms): 10
: 3 Detect Interval (ms)
: Disable Acl Number
: 3784 TTL
: Disable Process PST
: 300000
: 3
: No Diagnostic
: No Application Bind
: -- Session Detect TmrID
: -- Session WTR TmrID
: --
: FSM-0|RCV-0|IF-0|TOKEN-0
: --
5 BFD Configuration
Name : atob
: 2
: 7
: 10
: 30
: --
: 255
: Disable
: --
: --
368