(1) Computer
(5) Splitter
Figure 2-1 Computer to MT880 connection
2.3.3 Connecting Ethernet LAN to MT880
MT880 may be connected to any 10/100Base-TX Ethernet port.
When connecting MT880 to any Ethernet device that is capable of
operating at speeds higher than 10Mbps, be sure that the device has
auto-negotiation mode enabled for the connecting port.
Use cross-over cable to connect MT880 and the uplink port of a
switch or hub. Be sure that the cable connecting the LAN to MT880
does not exceed 100 meters.
(2) RJ-11 Tel Cable
(6) Phone Jack
2-3
(3) Phone
(4) RJ-45 Ethernet Cable
(7) MT880
(8) RJ-11 Tel Cable