Huawei NetEngine80E Configuration Manual - Reliability page 610

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE1-mpls-ldp] quit
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] mpls
[PE1-GigabitEthernet1/0/0] mpls ldp
[PE1-GigabitEthernet1/0/0] quit
# Configure the P router.
[P] mpls lsr-id 2.2.2.9
[P] mpls
[P-mpls] quit
[P] mpls ldp
[P-mpls-ldp] quit
[P] interface gigabitethernet1/0/0
[P-GigabitEthernet1/0/0] mpls
[P-GigabitEthernet1/0/0] mpls ldp
[P-GigabitEthernet1/0/0] quit
[P] interface gigabitethernet2/0/0
[P-GigabitEthernet2/0/0] mpls
[P-GigabitEthernet2/0/0] mpls ldp
[P-GigabitEthernet2/0/0] quit
# Configure PE2.
[PE2] mpls lsr-id 3.3.3.9
[PE2] mpls
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface gigabitethernet 1/0/0
[PE2-GigabitEthernet1/0/0] mpls
[PE2-GigabitEthernet1/0/0] mpls ldp
[PE2-GigabitEthernet1/0/0] quit
After the preceding configurations, LDP sessions can be set up between PE1 and the P router
and between the P router and PE2. Run the display mpls ldp session command. You can view
that the Status field is Operational in the command output.
Take the display on PE1 as an example.
<PE1> display mpls ldp session
LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.
------------------------------------------------------------------------------
PeerID
------------------------------------------------------------------------------
2.2.2.9:0
------------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
Step 4 Create a remote LDP session between PEs.
# Configure PE1.
[PE1] mpls ldp remote-peer 3.3.3.9
[PE1-mpls-ldp-remote-3.3.3.9] remote-ip 3.3.3.9
[PE1-mpls-ldp-remote-3.3.3.9] quit
# Configure PE2.
[PE2] mpls ldp remote-peer 1.1.1.9
[PE2-mpls-ldp-remote-1.1.1.9] remote-ip 1.1.1.9
[PE2-mpls-ldp-remote-1.1.1.9] quit
Issue 02 (2014-09-30)
Status LAM
Operational DU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
SsnRole SsnAge
Active 0000:03:01
KASent/Rcv
726/726
593