Huawei NetEngine80E Configuration Manual - Reliability page 117

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 4 Bind static routes to the APS-enabled interfaces of PE2, PE3, and CE2.
# Configure PE2.
[PE2] ip route-static 192.168.1.0 255.255.255.0 Global-Mp-Group24 192.168.1.1
# Configure PE3.
[PE3] ip route-static 192.168.1.0 255.255.255.0 Global-Mp-Group24 192.168.1.1
# Configure CE2.
[CE2] ip route-static 192.168.2.0 255.255.255.0 Global-Mp-Group24 192.168.1.3
Step 5 Configure an Interior Gateway Protocol (IGP) and import static routes on PE2, PE3, and CE2.
Intermediate System to Intermediate System (IS-IS) is used in this example.
# Configure PE1.
[PE1] isis 1
[PE1-isis-1] is-level level-1
[PE1-isis-1] network-entity 1111.1111.1111.1111.00
[PE1-isis-1] graceful-restart
[PE1-isis-1] cost-style wide-compatible
[PE1-isis-1] timer spf 1 1 50
[PE1-isis-1] traffic-eng level-1-2
[PE1-isis-1] quit
[PE1] interface gigabitEthernet 2/0/1
[PE1-GigabitEthernet2/0/1] isis enable 1
[PE1-GigabitEthernet2/0/1] quit
[PE1] interface gigabitEthernet 2/0/2
[PE1-GigabitEthernet2/0/2] isis enable 1
[PE1-GigabitEthernet2/0/2] quit
[PE1] interface loopback 0
[PE1-LoopBack0] isis enable 1
[PE1-LoopBack0] quit
Configure P1.
[P1] isis 1
[P1-isis-1] is-level level-1
[P1-isis-1] network-entity 2222.2222.2222.2222.00
[P1-isis-1] graceful-restart
[P1-isis-1] cost-style wide-compatible
[P1-isis-1] timer spf 1 1 50
[P1-isis-1] traffic-eng level-1-2
[P1-isis-1] quit
[P1] interface gigabitEthernet 2/0/1
[P1-GigabitEthernet2/0/1] isis enable 1
[P1-GigabitEthernet2/0/1] quit
[P1] interface gigabitEthernet 3/0/2
[P1-GigabitEthernet3/0/2] isis enable 1
[P1-GigabitEthernet3/0/2] quit
[P1] interface loopback 0
Issue 02 (2014-09-30)
[CE2-Trunk-Serial24/24:0] ppp mp-global global-mp-group 24
[CE2-Trunk-Serial24/24:0] quit
NOTE
192.168.1.0 is the destination IP address, and 255.255.255.0 is the IP address mask.
NOTE
192.168.1.0 is the destination IP address, and 255.255.255.0 is the IP address mask.
NOTE
192.168.2.0 is the destination IP address, and 255.255.255.0 is the IP address mask.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents