Huawei NetEngine80E Configuration Manual - Reliability page 119

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE3-Global-Mp-Group24] isis enable 1
[PE3-Global-Mp-Group24] quit
# Configure CE2.
[CE2] isis 1
[CE2-isis-1] import-route static
[CE2-isis-1] is-level level-1
[CE2-isis-1] network-entity 5555.5555.5555.5555.00
[CE2-isis-1] graceful-restart
[CE2-isis-1] cost-style wide-compatible
[CE2-isis-1] timer spf 1 1 50
[CE2-isis-1] traffic-eng level-1-2
[CE2-isis-1] quit
[CE2] interface global-mp-group 24
[CE2-Global-Mp-Group24] isis enable 1
[CE2-Global-Mp-Group24] quit
Step 6 Verify the configuration.
# Run the display aps group command on PE2, PE3, and CE2 to view the E-APS configurations.
[PE2] display aps group 24
APS Group 24: Cpos6/2/0 working channel 1(Active)
--------------------------------------------------------------------------------
Group Work-Channel Protect-Channel Wtr W-State P-State Switch-Cmd Switch-Result
--------------------------------------------------------------------------------
24
--------------------------------------------------------------------------------
[PE3] display aps group 24
APS Group 24: APS working channel is 4.4.4.4
--------------------------------------------------------------------------------
Group Work-Channel Protect-Channel Wtr W-State P-State Switch-Cmd Switch-Result
--------------------------------------------------------------------------------
24
--------------------------------------------------------------------------------
[CE2] display aps group 24
APS Group 24: Cpos3/0/1 working channel 1(Active)
(Inactive)
minutes)
--------------------------------------------------------------------------------
Group Work-Channel Protect-Channel Wtr W-State P-State Switch-Cmd Switch-Result
--------------------------------------------------------------------------------
24
--------------------------------------------------------------------------------
# Run the display current-configuration | include route command on PE2, PE3, and CE2 to
view the configured parameters.
[PE2] display current-configuration | include route
import-route static
ip route-static 192.168.1.0 255.255.255.0 Global-Mp-Group24 192.168.1.1
[PE3] display current-configuration | include route
import-route static
ip route-static 192.168.1.0 255.255.255.0 Global-Mp-Group24 192.168.1.1
[CE2] display current-configuration | include route
Issue 02 (2014-09-30)
PGP authentication string: 1234
APS protection channel is 5.5.5.5
Cpos6/2/0 5.5.5.5
Cpos1/1/0 protection channel 0(Inactive)
PGP authentication string: 1234
Bidirection, 1:1 mode, Revert time(1 minutes)
KeepAlive Timer: 2(seconds), Hold Timer: 200(seconds)
No Request on Both Working and Protection Side
4.4.4.4 Cpos1/1/0
Cpos3/0/0 protection channel 0
Bidirection, 1:1 mode, Revert time(1
No Request on Both Working and Protection Side
Cpos3/0/1 Cpos3/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NA ok ok NA
1 ok ok NA
1 ok ok NA
3 APS Configuration
idle
idle
idle
102