Huawei NetEngine80E Configuration Manual - Reliability page 1005

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Set up a PW over a bidirectional LSP.
For details about how to set up a PW (between PEs) based on a bidirectional LSP, see see
"Configuring a PW" in the HUAWEI NetEngine80E/40E Router Configuration Guide-MPLS
or information in the configuration files of this configuration example.
Step 2 Create an ME and bind it to a PW.
# Create an ME named test on PE1 and bind the ME to the PW.
<HUAWEI> system-view
[HUAWEI] sysname PE1
[PE1] mpls-tp meg test
[PE1-mpls-tp-meg-test] me l2vc peer-ip 3.3.3.3 vc-id 30000 vc-type vlan mep-id 1
remote-mep-id 2
# Create an ME named test on PE3 and bind the ME to the PW.
<HUAWEI> system-view
[HUAWEI] sysname PE3
[PE3] mpls-tp meg test
[PE3-mpls-tp-meg-test] me l2vc peer-ip 1.1.1.1 vc-id 30000 vc-type vlan mep-id 2
remote-mep-id 1
Step 3 Enable CC on the MEP and RMEP.
# Enable CC on PE1.
[PE1-mpls-tp-meg-test] cc send enable
[PE1-mpls-tp-meg-test] cc receive enable
# Enable CC on LSRC.
[PE3-mpls-tp-meg-test] cc send enable
[PE3-mpls-tp-meg-test] cc receive enable
Step 4 Enable two-way DM.
<PE1> delay-measure two-way
Two-way delay measure statistics
delay(us):
100
100
100
99
100
The Max delay:100, The Max delay variation:1
The Min delay:99, The Min delay variation:0
The delay average:100, The delay variation average:1
Total sent Packets Number:5, Total received Packets Number: 5
----End
Issue 02 (2014-09-30)
Create an ME and bind it to a PW.
Enable CC on the MEP and RMEP.
Enable two-way DM.
MEG name
ID of the VC bound to the ME
delay variation(us):
--
0
0
1
1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MPLS-TP OAM Configuration
988