Huawei NetEngine80E Configuration Manual - Reliability page 223

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
2.
3.
Issue 02 (2014-09-30)
[NPE2-Virtual-Ethernet2/0/3] vrrp vrid 2 virtual-ip 192.168.2.254
[NPE2-Virtual-Ethernet2/0/3] vrrp vrid 2 priority 120
[NPE2-Virtual-Ethernet2/0/3] admin-vrrp vrid 2
[NPE2-Virtual-Ethernet2/0/3] quit
After the configuration is complete, run the display vrrp command on NPEs. You can
view that VRRP backup group 1 is the Master in VE 2/0/1 of NPE1; VRRP backup group
2 is the Backup in VE 2/0/3. VRRP backup group 1 is the Backup in VE 2/0/1 of NPE2;
VRRP backup group 2 is the Master in VE2/0/3. All these VRRP backup groups are
mVRRPs.
Take NPE1 as an example.
[NPE1] display vrrp
Virtual-Ethernet2/0/3 | Virtual Router 2
state : Backup
Virtual IP : 192.168.2.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
preempt : yes delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0102
Check TTL : YES
Config type : admin-vrrp
Virtual-Ethernet2/0/1 | Virtual Router 1
state : Master
Virtual IP : 192.168.1.254
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
preempt : yes delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : admin-vrrp
Configure the service VRRP for NPEs.
# Configure NPE1.
[NPE1] interface virtual-ethernet2/0/5
[NPE1-Virtual-Ethernet2/0/5] vrrp vrid 3 virtual-ip 172.16.1.254
[NPE1-Virtual-Ethernet2/0/5] quit
[NPE1] interface virtual-ethernet2/0/7
[NPE1-Virtual-Ethernet2/0/7] vrrp vrid 4 virtual-ip 172.17.1.254
[NPE1-Virtual-Ethernet2/0/7] quit
# Configure NPE2.
[NPE2] interface virtual-ethernet2/0/5
[NPE2-Virtual-Ethernet2/0/5] vrrp vrid 3 virtual-ip 172.16.1.254
[NPE2-Virtual-Ethernet2/0/5] quit
[NPE2] interface virtual-ethernet2/0/7
[NPE2-Virtual-Ethernet2/0/7] vrrp vrid 4 virtual-ip 172.17.1.254
[NPE2-Virtual-Ethernet2/0/7] quit
Bind the service VRRP to the mVRRP.
# Configure NPE1.
[NPE1] interface virtual-ethernet2/0/5
[NPE1-Virtual-Ethernet2/0/5] vrrp vrid 3 track admin-vrrp interface virtual-
ethernet2/0/1 vrid 1 unflowdown
[NPE1-Virtual-Ethernet2/0/5] quit
[NPE1] interface virtual-ethernet2/0/7
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
206