Huawei NetEngine80E Configuration Manual - Reliability page 262

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l In each of the other service VRRP backup groups, the value of the State field is Master and
[NPE1] display vrrp brief
VRID
----------------------------------------------------------
10
100
101
102
103
The command output on NPE2 is as follows:
l In mVRRP backup group 10, the value of the State field is Backup and the value of the
l In each of service VRRP backup groups, the value of the State field is Backup and the value
[NPE2] display vrrp brief
VRID
---------------------------------------------------------
10
100
101
102
103
# Run the shutdown command on GE 1/0/1.101 of NPE1 to simulate a fault in the link between
NPE1 and CE2.
[NPE1] interface gigabitethernet1/0/1.101
[NPE1-GigabitEthernet1/0/1.101] shutdown
[NPE1-GigabitEthernet1/0/1.101] quit
The link BFD session between NPE1 and CE2 goes Down.
[NPE1] display bfd session all
--------------------------------------------------------------------------------
Local
--------------------------------------------------------------------------------
8192
8193
8194
8195
8196
--------------------------------------------------------------------------------
In this configuration example, if two or more link BFD sessions go Down, the mVRRP backup
group will rapidly perform a master/backup VRRP switchover.
As two link BFD sessions went Down currently, the mVRRP backup group performs a master/
backup VRRP switchover. Run the display vrrp brief command on each NPE.
The command output on NPE1 is as follows:
l In mVRRP backup group 10, the value of the State field is Initialize and the value of the
l In each of service VRRP backup groups, the value of the State field is Initialize and the
[NPE1] display vrrp brief
VRID
Issue 02 (2014-09-30)
the value of the Type field is Member.
State
Interface
Master
Eth-Trunk1.1
Initialize
GE1/0/1.100
Master
GE1/0/1.101
Master
GE1/0/1.102
Master
GE1/0/1.103
Type field is Admin.
of the Type field is Member.
State
Interface
Backup
GE1/0/1.1
Backup
GE1/0/1.100
Backup
GE1/0/1.101
Backup
GE1/0/1.102
Backup
GE1/0/1.103
Remote PeerIpAddr
8192
10.1.1.253
0
10.100.1.1
0
10.101.1.1
8194
10.102.1.1
8195
10.103.1.1
Total UP/DOWN Session Number : 3/2
Type field is Admin.
value of the Type field is Member.
State
Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type
Virtual IP
Admin
10.1.1.1
Member
10.100.1.200
Member
10.101.1.200
Member
10.102.1.200
Member
10.103.1.200
Type
Virtual IP
Admin
10.1.1.1
Member
10.100.1.200
Member
10.101.1.200
Member
10.102.1.200
Member
10.103.1.200
State
Type
Up
S_AUTO_IF
Down
S_AUTO_IF
Down
S_AUTO_IF
Up
S_AUTO_IF
Up
S_AUTO_IF
Type
Virtual IP
4 VRRP Configuration
InterfaceName
Eth-Trunk1.1
GigabitEthernet1/0/1.100
GigabitEthernet1/0/1.101
GigabitEthernet1/0/1.102
GigabitEthernet1/0/1.103
245

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents