Huawei NetEngine80E Configuration Manual - Reliability page 324

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
# Run the undo shutdown command on POS 1/0/0 of Router A. Wait 20s and run the display
vrrp6 command on Router A. The command output shows that the VRRP status is Master on
Router A.
[RouterA] display vrrp6
GigabitEthernet1/0/0 | Virtual Router 1
----End
Configuration Files
l
Issue 02 (2014-09-30)
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
Preempt : YES Delay Time : 0 s
TimerRun : 100 cs
TimerConfig : 100 cs
Virtual Mac : 0000-5e00-0201
Check hop limit : YES
Config type : normal-vrrp
Backup-forward : disabled
Track BFD : 2 Priority increased : 40
BFD-Session State : UP
Create time : 2010-06-22 17:35:06 UTC+08:00
Last change time : 2010-06-22 17:35:16 UTC+08:00
State : Master
Virtual IP : FE80::1
2001:DB8::100
Master IP : 2001:DB8::1
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
Preempt : YES Delay Time : 20 s
TimerRun : 100 cs
TimerConfig : 100 cs
Virtual Mac : 0000-5e00-0201
Check hop limit : YES
Config type : normal-vrrp
Backup-forward : disabled
Track IF : POS1/0/0
IF State : UP
Create time : 2010-06-22 17:40:00 UTC+08:00
Last change time : 2010-06-22 17:40:04 UTC+08:00
Configuration file of Router A
#
sysname RouterA
#
ipv6
#
bfd
#
ospfv3 1
router-id 1.1.1.1
#
interface GigabitEthernet1/0/0
undo shutdown
ipv6 enable
ipv6 address 2001:DB8::1/64
vrrp6 vrid 1 virtual-ip FE80::1 link-local
vrrp6 vrid 1 virtual-ip 2001:DB8::100
vrrp6 vrid 1 priority 120
vrrp6 vrid 1 preempt-mode timer delay 20
vrrp6 vrid 1 track interface pos 1/0/0 reduce 40
ospfv3 1 area 0.0.0.0
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Priority reduced : 40
4 VRRP Configuration
307