Huawei NetEngine80E Configuration Manual - Reliability page 89
Hide thumbs
Also See for NetEngine80E:
- Configuration manual (1301 pages) ,
- Configuration manual - reliability (761 pages) ,
- Installation manual (169 pages)
Table of Contents
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
2.
3.
Issue 02 (2014-09-30)
[PE3] mpls
[PE3-mpls] mpls te
[PE3-mpls] quit
[PE3] interface gigabitethernet 3/0/2
[PE3-GigabitEthernet3/0/2] mpls
[PE3-GigabitEthernet3/0/2] mpls te
[PE3-GigabitEthernet3/0/2] quit
Configure an explicit path of a tunnel.
# Configure PE1.
[PE1] explicit-path path1
[PE1-explicit-path-path1] next hop 10.1.1.2
[PE1-explicit-path-path1] next hop 10.1.4.2
[PE1-explicit-path-path1] next hop 4.4.4.4
[PE1] explicit-path path2
[PE1-explicit-path-path2] next hop 10.1.2.2
[PE1-explicit-path-path2] next hop 10.1.5.2
[PE1-explicit-path-path2] next hop 5.5.5.5
#Configure PE2.
[PE2] explicit-path path
[PE2-explicit-path-path] next hop 10.1.4.1
[PE2-explicit-path-path] next hop 10.1.1.1
[PE2-explicit-path-path] next hop 1.1.1.1
#Configure PE3.
[PE3] explicit-path path
[PE3-explicit-path-path] next hop 10.1.5.1
[PE3-explicit-path-path] next hop 10.1.2.1
[PE3-explicit-path-path] next hop 1.1.1.1
Configure MPLS TE.
# Configure PE1.
[PE1] interface tunnel 1/0/0
[PE1-Tunnel1/0/0] ip address unnumbered interface LoopBack0
[PE1-Tunnel1/0/0] tunnel-protocol mpls te
[PE1-Tunnel1/0/0] destination 4.4.4.4
[PE1-Tunnel1/0/0] mpls te tunnel-id 1
[PE1-Tunnel1/0/0] mpls te path explicit-path path1
[PE1-Tunnel1/0/0] mpls te reserved-for-binding
[PE1-Tunnel1/0/0] mpls te commit
[PE1-Tunnel1/0/0] quit
[PE1] interface tunnel 2/0/0
[PE1-Tunnel2/0/0] ip address unnumbered interface LoopBack0
[PE1-Tunnel2/0/0] tunnel-protocol mpls te
[PE1-Tunnel2/0/0] destination 5.5.5.5
[PE1-Tunnel2/0/0] mpls te tunnel-id 2
[PE1-Tunnel2/0/0] mpls te path explicit-path path2
[PE1-Tunnel2/0/0] mpls te reserved-for-binding
[PE1-Tunnel2/0/0] mpls te commit
[PE1-Tunnel2/0/0] quit
[PE1] tunnel-policy ct1
[PE1-tunnel-policy-ct1] tunnel select-seq cr-lsp load-balance-number 1
[PE1-tunnel-policy-ct1] quit
[PE1] tunnel-policy ct2
[PE1-tunnel-policy-ct2] tunnel select-seq cr-lsp load-balance-number 1
[PE1-tunnel-policy-ct2] quit
# Configure PE2.
[PE2] interface tunnel 1/0/0
[PE2-Tunnel1/0/0] ip address unnumbered interface LoopBack0
[PE2-Tunnel1/0/0] tunnel-protocol mpls te
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
72
Advertisement
Table of Contents
