Huawei NetEngine80E Configuration Manual - Reliability page 93

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE3] display atm-trunk 1
Interface Atm-Trunk1's state information is:
Operate status: up
--------------------------------------------------------------------------------
PortName
Atm1/0/2
----End
Configuration File
l
Issue 02 (2014-09-30)
Number Of Up Port In Trunk: 1
Status Active Status
Up Inactive
Configuration File on PE1.
#
sysname PE1
isis 1
is-level level-1
network-entity 1111.1111.1111.1111.00
graceful-restart
cost-style wide-compatible
timer spf 1 1 50
traffic-eng level-1-2
#
interface gigabitEthernet 2/0/1
isis enable 1
mpls
mpls te
interface gigabitEthernet 2/0/2
isis enable 1
mpls
mpls te
#
interface loopBack 0
ip address 1.1.1.1 32
mpls lsr-id 1.1.1.1
mpls
mpls te
#
explicit-path path1
next hop 10.1.1.2
next hop 10.1.4.2
next hop 4.4.4.4
explicit-path path2
next hop 10.1.2.2
next hop 10.1.5.2
next hop 5.5.5.5
#
interface tunnel 1/0/0
ip address unnumbered interface LoopBack0
tunnel-protocol mpls te
destination 4.4.4.4
mpls te tunnel-id 1
mpls te path explicit-path path1
mpls te reserved-for-binding
mpls te commit
interface tunnel 2/0/0
ip address unnumbered interface LoopBack0
tunnel-protocol mpls te
destination 5.5.5.5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 APS Configuration
76