HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
slave restart
The SMB is restarted.
----End
6.2.6 Checking the Configurations
By viewing the status of the AMB and SMB, you can check whether the configurations are
successful.
Prerequisites
The configurations of the system-level GR function are complete.
Procedure
l
----End
Example
Run the display switchover state command to check the status of AMB and SMB.
<HUAWEI> display switchover state
Slot 8 HA FSM State(master): realtime or routine backup.
Slot 7 HA FSM State(slave): receiving realtime or routine data.
6.3 Maintaining HA
This section describes how to maintain HA. The detailed operation includes monitoring the
operations status of HA.
6.3.1 Monitoring the Running of HA
By monitoring the operating status of HA, you can view information about HA during the
operation.
Context
In routine maintenance, you can run the following command in any view to display the running
of HA.
Issue 02 (2014-09-30)
Run the display switchover state command to check the status of AMB and SMB.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 GR Configuration
450