Huawei NetEngine80E Configuration Manual - Reliability page 256

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[NPE2-GigabitEthernet1/0/1.102] qinq vrrp pe-vid 10 ce-vid 301
[NPE2-GigabitEthernet1/0/1.102] vrrp vrid 102 virtual-ip 10.102.1.200
[NPE2-GigabitEthernet1/0/1.102] quit
[NPE2] interface gigabitethernet1/0/1.103
[NPE2-GigabitEthernet1/0/1.103] qinq vrrp pe-vid 10 ce-vid 401
[NPE2-GigabitEthernet1/0/1.103] vrrp vrid 103 virtual-ip 10.103.1.200
[NPE2-GigabitEthernet1/0/1.103] quit
# After completing the preceding configurations, run the display vrrp brief command on each
NPE.
The command output on NPE1 is as follows:
l In mVRRP backup group 10, the value of the State field is Master and the value of the
l In each of common VRRP backup groups, the value of the State field is Master and the
[NPE1] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
The command output on NPE2 is as follows:
l In mVRRP backup group 10, the value of the State field is Backup and the value of the
l In each of common VRRP backup groups, the value of the State field is Master and the
[NPE2] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
Step 4 Bind each common VRRP backup group to the mVRRP backup group so that the common VRRP
backup groups become service VRRP backup groups.
# Configure NPE1.
[NPE1] interface gigabitethernet1/0/1.100
[NPE1-GigabitEthernet1/0/1.100] vrrp vrid 100 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.100] quit
[NPE1] interface gigabitethernet1/0/1.101
[NPE1-GigabitEthernet1/0/1.101] vrrp vrid 101 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.101] quit
[NPE1] interface gigabitethernet1/0/1.102
[NPE1-GigabitEthernet1/0/1.102] vrrp vrid 102 track admin-vrrp interface eth-
Issue 02 (2014-09-30)
Type field is Admin.
value of the Type field is Normal.
State Interface
Master Eth-Trunk1.1
Master GE1/0/1.100
Master GE1/0/1.101
Master GE1/0/1.102
Master GE1/0/1.103
Type field is Admin.
value of the Type field is Normal.
State Interface
Backup Eth-Trunk1.1
Master GE1/0/1.100
Master GE1/0/1.101
Master GE1/0/1.102
Master GE1/0/1.103
NOTE
Split horizon configured on the VPLS aggregation network prevents traffic transmission between interfaces
on NPEs. Therefore, the sub-interfaces where common VRRP backup groups are configured on NPEs
cannot exchange VRRP packets, causing the VRRP statues to be Master on both NPE1 and NPE2 in each
common VRRP backup group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type Virtual IP
Admin 10.1.1.1
Normal 10.100.1.200
Normal 10.101.1.200
Normal 10.102.1.200
Normal 10.103.1.200
Type Virtual IP
Admin 10.1.1.1
Normal 10.100.1.200
Normal 10.101.1.200
Normal 10.102.1.200
Normal 10.103.1.200
4 VRRP Configuration
239