Huawei NetEngine80E Configuration Manual - Reliability page 228

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 6 Configure the access of CEs through the access network to MPLS L3VPN with NPEs.
# Configure CE1.
<HUAWEI> system-view
[HUAWEI] sysname CE1
[CE1] interface gigabitethernet1/0/0.1
[CE1-GigabitEthernet1/0/0.1] vlan-type dot1q 101
[CE1-GigabitEthernet1/0/0.1] ip address 172.16.1.1 24
[CE1-GigabitEthernet1/0/0.1] quit
[CE1] ospf 100
[CE1-ospf-100] area 0
[CE1-ospf-100-area-0.0.0.0] network 172.16.1.0 0.0.0.255
Issue 02 (2014-09-30)
Auth Type : NONE
Virtual Mac :
0000-5e00-0104
Check TTL : YES
Config type : member-vrrp
Virtual-Ethernet2/0/5 | Virtual Router 3
state : Master
Virtual IP : 172.16.1.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 100
preempt : yes
delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac :
0000-5e00-0103
Check TTL : YES
Config type : member-vrrp
Virtual-Ethernet2/0/3 | Virtual Router 2
state : Backup
Virtual IP : 192.168.2.254
PriorityRun : 100
PriorityConfig : 100
MasterPriority : 120
preempt : yes
delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac :
0000-5e00-0102
Check TTL : YES
Config type : admin-vrrp
Track BFD : 32
type: link
bfd-session state : up
Track BFD : 342
type: peer
bfd-session state : up
Virtual-Ethernet2/0/1 | Virtual Router 1
state : Master
Virtual IP : 192.168.1.254
PriorityRun : 120
PriorityConfig : 120
MasterPriority : 120
preempt : yes
delay time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac :
0000-5e00-0101
Check TTL : YES
Config type : admin-vrrp
Track BFD : 31
type: link
bfd-session state : up
Track BFD : 341
type: peer
bfd-session state : up
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents