Huawei NetEngine80E Configuration Manual - Reliability page 408

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
-----------------------------------------------------
PortName
-----------------------------------------------------
GigabitEthernet1/0/0
GigabitEthernet2/0/0
-----------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 0
----End
Configuration Files
l
l
Issue 02 (2014-09-30)
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Output:0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Status
DOWN
DOWN
Configuration file of Router A
#
sysname RouterA
#
bfd
#
interface Eth-Trunk1
undo shutdown
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
undo shutdown
eth-trunk 1
#
interface GigabitEthernet2/0/0
undo shutdown
eth-trunk 1
#
bfd atob bind peer-ip 10.1.1.2 interface Eth-Trunk 1
discriminator local 10
discriminator remote 20
wtr 5
commit
#
return
Configuration file of Router B
#
sysname RouterB
#
bfd
#
interface Eth-Trunk1
undo shutdown
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
undo shutdown
eth-trunk 1
#
interface GigabitEthernet2/0/0
undo shutdown
eth-trunk 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0.00%
Weight
1
1
5 BFD Configuration
391