Huawei NetEngine80E Configuration Manual - Reliability page 1033

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
Issue 02 (2014-09-30)
Fault Type
Min Tx Interval (ms)
Max Tx Interval (ms)
Actual Tx Interval (ms)
Detect Multi
Source IP Address
Destination IP Address
Destination Port
TOS-EXP
PDT Index
------------------------------------------------------------------------------
--
LSP Information:
------------------------------------------------------------------------------
--
Ingress LSR ID
Tunnel ID
LSP ID
Tunnel-Interface
In-Interface
Out-Interface
LSP token
LSP Type
------------------------------------------------------------------------------
--
------------------------------------------------------------------------------
--
BFD Bit Error Information:
------------------------------------------------------------------------------
--
Session MIndex
Session Type
FSM Board Id
Fault Type
Min Tx Interval (ms)
Max Tx Interval (ms)
Actual Tx Interval (ms)
Detect Multi
Source IP Address
Destination IP Address
Destination Port
TOS-EXP
PDT Index
------------------------------------------------------------------------------
--
LSP Information:
------------------------------------------------------------------------------
--
Ingress LSR ID
Tunnel ID
LSP ID
Tunnel-Interface
In-Interface
Out-Interface
LSP token
LSP Type
------------------------------------------------------------------------------
--
Total Session Number : 2
If a bit error event occurs and bit-error-triggered RSVP-TE tunnel switching cannot protect
services against bit errors, run the display mpls l2vc command. The command output
shows the active/standby status of PWs and PW switching result.
<HUAWEI> display mpls l2vc
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Bit-Error-Triggered Protection Switching Configuration
: -
: 1000
: 30000
: 30000
: 3
: 1.1.1.1
: 127.0.0.1
: 3784
: 7
: FSM-0 | RCV-0 | IF-0 | TOKEN-0
: 1.1.1.1
: 100
: 2
: Tunnel1/0/1
: GigabitEthernet1/0/0
: GigabitEthernet1/0/0
: 0x800804
: Primary
: 258
: PE
: 1
: -
: 1000
: 30000
: 30000
: 3
: 1.1.1.1
: 127.0.0.1
: 3784
: 7
: FSM-0 | RCV-0 | IF-0 | TOKEN-0
: 1.1.1.1
: 200
: 2
: Tunnel1/0/2
: GigabitEthernet1/0/1
: GigabitEthernet1/0/1
: 0x80080a
: Primary
1016