Maintaining Bfd; Clearing Bfd Statistics; Monitoring Bfd Status - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
OAM bandwidth detail information on slot 2:
EOAM-1ag bandwidth-usage info:
Session tx total bandwidth is: 0 bps
Session rx total bandwidth is: 0 bps
BFD bandwidth-usage info:
Session tx total bandwidth is: 0 bps
Session rx total bandwidth is: 0 bps
MPLS OAM bandwidth-usage info:
Session tx total bandwidth is: 0 bps
Session rx total bandwidth is: 0 bps
MPLS-TP OAM bandwidth-usage info:
Session tx total bandwidth is: 0 bps
Session rx total bandwidth is: 0 bps
MQE bandwidth-usage info:
Session tx total bandwidth is: 0 bps
Session rx total bandwidth is: 0 bps

5.16 Maintaining BFD

This section describes how to maintain BFD by deleting BFD statistics, and monitoring BFD
operations.

5.16.1 Clearing BFD Statistics

Deleting previous BFD statistics before collecting BFD statistics within a specified period of
time is recommended.
Context
BFD statistics cannot be restored after being deleted. Exercise caution when using the command.
Procedure
l
----End

5.16.2 Monitoring BFD Status

Monitoring BFD status by viewing information about BFD during the operation.
Context
The following commands are run in any view during routine maintenance to show BFD status.
Issue 02 (2014-09-30)
NOTICE
Run the reset bfd statistics { all [ slot slot-id ] | discriminator discr-value } command in
the user view to delete BFD statistics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
365