Huawei NetEngine80E Configuration Manual - Reliability page 257

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.102] quit
[NPE1] interface gigabitethernet1/0/1.103
[NPE1-GigabitEthernet1/0/1.103] vrrp vrid 103 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE1-GigabitEthernet1/0/1.103] quit
# Configure NPE2.
[NPE2] interface gigabitethernet1/0/1.100
[NPE2-GigabitEthernet1/0/1.100] vrrp vrid 100 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE2-GigabitEthernet1/0/1.100] quit
[NPE2] interface gigabitethernet1/0/1.101
[NPE2-GigabitEthernet1/0/1.101] vrrp vrid 101 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE2-GigabitEthernet1/0/1.101] quit
[NPE2] interface gigabitethernet1/0/1.102
[NPE2-GigabitEthernet1/0/1.102] vrrp vrid 102 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE2-GigabitEthernet1/0/1.102] quit
NPE2] interface gigabitethernet1/0/1.103
[NPE2-GigabitEthernet1/0/1.103] vrrp vrid 103 track admin-vrrp interface eth-
trunk1.1 vrid 10 unflowdown
[NPE2-GigabitEthernet1/0/1.103] quit
# After completing the preceding configurations, run the display vrrp brief command on each
NPE.
The command output on NPE1 is as follows:
l In mVRRP backup group 10, the value of the State field is Master and the value of the
l In each of service VRRP backup groups, the value of the State field is Master and the value
[NPE1] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
The command output on NPE2 is as follows:
l In mVRRP backup group 10, the value of the State field is Backup and the value of the
l In each of service VRRP backup groups, the value of the State field is Backup and the value
[NPE2] display vrrp brief
VRID
--------------------------------------------------------
10
100
101
102
103
The command output shows that the service VRRP backup groups have been successfully bound
to the mVRRP backup group and their statuses are correct.
Issue 02 (2014-09-30)
Type field is Admin.
of the Type field is Member.
State
Interface
Master
Eth-Trunk1.1
Master
GE1/0/1.100
Master
GE1/0/1.101
Master
GE1/0/1.102
Master
GE1/0/1.103
Type field is Admin.
of the Type field is Member.
State
Interface
Backup
Eth-Trunk1.1
Backup
GE1/0/1.100
Backup
GE1/0/1.101
Backup
GE1/0/1.102
Backup
GE1/0/1.103
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type
Virtual IP
Admin
10.1.1.1
Member
10.100.1.200
Member
10.101.1.200
Member
10.102.1.200
Member
10.103.1.200
Type
Virtual IP
Admin
10.1.1.1
Member
10.100.1.200
Member
10.101.1.200
Member
10.102.1.200
Member
10.103.1.200
4 VRRP Configuration
240

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents