Huawei NetEngine80E Configuration Manual - Reliability page 222

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Step 5 Configure the reliability of MPLS L2VPN on the access network.
1.
Issue 02 (2014-09-30)
local PSN State
local forwarding state : forwarding
local status code
remote AC OAM state
remote PSN state
remote forwarding state: forwarding
remote statuscode
BFD for PW
manual fault
active state
forwarding entry
link state
local VC MTU
Local VCCV
Remote VCCV
local control word
tunnel policy name
traffic behavior name
PW template name
primary or secondary
VC tunnel/token info
NO.0 TNL type : lsp
create time
up time
last change time
VC last up time
VC total up time
CKey
11
NKey
PW redundancy mode
AdminPw interface
AdminPw link state
Run the display admin-vsi binding command on the UPE. You can view the binding
relationship of the service VSI and the mVSI. Take UPE1 as an example:
[UPE1] display admin-vsi binding
Admin-vsi
--------------------------------------------
admin-vsi1
Configure the mVRRP for NPEs. NPEs work in load balancing mode. For the VSI of UPE1,
NPE1 serves as the master NPE; for the VSI of UPE2, NPE2 serves as the master NPE.
# Configure NPE1.
[NPE1] interface virtual-ethernet2/0/1.1
[NPE1-Virtual-Ethernet2/0/1.1] ip address 192.168.1.1 24
[NPE1-Virtual-Ethernet2/0/1.1] vrrp vrid 1 virtual-ip 192.168.1.254
[NPE1-Virtual-Ethernet2/0/1.1] vrrp vrid 1 priority 120
[NPE1-Virtual-Ethernet2/0/1.1] admin-vrrp vrid 1
[NPE1-Virtual-Ethernet2/0/1.1] quit
[NPE1] interface virtual-ethernet2/0/3
[NPE1-Virtual-Ethernet2/0/3] ip address 192.168.2.1 24
[NPE1-Virtual-Ethernet2/0/3] vrrp vrid 2 virtual-ip 192.168.2.254
[NPE1-Virtual-Ethernet2/0/3] admin-vrrp vrid 2
[NPE1-Virtual-Ethernet2/0/3] quit
# Configure NPE2.
[NPE2] interface virtual-ethernet2/0/1
[NPE2-Virtual-Ethernet2/0/1] ip address 192.168.1.2 24
[NPE2-Virtual-Ethernet2/0/1] vrrp vrid 1 virtual-ip 192.168.1.254
[NPE2-Virtual-Ethernet2/0/1] admin-vrrp vrid 1
[NPE2-Virtual-Ethernet2/0/1] quit
[NPE2] interface virtual-ethernet2/0/3
[NPE2-Virtual-Ethernet2/0/3] ip address 192.168.2.2 24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: up
: 0x0
: up
: up
: 0x0
: unavailable
: not set
: active
: exist
: up
: 1500 remote VC MTU
: alert lsp-ping bfd
: alert lsp-ping bfd
: disable remote control word
: --
: --
: --
: primary
: 1 tunnels/tokens
, TNL ID : 0x2002003
: 0 days, 0 hours, 0 minutes, 10 seconds
: 0 days, 0 hours, 0 minutes, 0 seconds
: 0 days, 0 hours, 30 minutes, 18 seconds
: 2008/07/24 12:31:31
: 0 days, 2 hours, 12 minutes, 51 seconds
:
: 10
: --
: --
: --
Service-vsi
vsi1
4 VRRP Configuration
: 1500
: none
205